Intelligent digital,dual-frequency dual-channel eddy current flaw detector,Easy to operate interface

Intelligent digital,dual-frequency dual-channel eddy current flaw detector,Easy to operate interface

Discriptions

FET-2.0 dual-frequency dual-channel eddy current flaw detector is suitable for auto parts, metal parts, fasteners online, offline flaw detection, can be used tube wall, drill plate, bearing ring, pipe, mechanical parts, hole slab, square billet, round billet and other mechanical parts automatic flaw detection. FET-2.0 dual-frequency dual-channel eddy current flaw detector has two channels, which can drive the combined probe composed of absolute and differential coils, and the detection channel is used for data acquisition at the same time for detecting metal tubes and rods. The longitudinal cracks and transverse defects (such as lapels), dark cracks, open cracks and other defects in the production of wire rods have high sensitivity. In the process of production, cracks and road injuries caused by faults can be reliably detected. The signal obtained by the detection channel can be displayed on the screen in real time by impedance plan and time base scan.
FET-2.0 dual-frequency dual-channel eddy current flaw detector can adapt to the testing requirements of different metal materials, etc., and because of the all-digital design, it can establish a number of standard testing procedures or expert systems in the instrument, which is convenient for users to call when changing product specifications, equipped with input and output control interfaces, which is convenient for the detection site to be connected with various equipment and work synchronously, forming a highly automated whole. Once through two tests, to achieve double insurance for product quality.
FET-2.0 dual-frequency dual-channel eddy current flaw detector has a test frequency range of 64Hz ~ 30MHz, which can adapt to the detection requirements of various metal pipelines, a variety of unique alarm modes, fast automatic electronic digital balance, and due to the use of fully digital design. Therefore, standard testing procedures can be established in the instrument, which is convenient for users to call when changing materials of different specifications.

Specifications

Other descriptions

1,FET-2.0 dual-frequency dual-channel eddy current flaw detector has the function of detecting signal playback, two-way access and so on.
2,The operating interface of FET-2.0 dual-frequency dual-channel eddy current flaw detector is simple, intelligent and easy to operate.
3,FET-2.0 dual-frequency dual-channel eddy current flaw detector can store a large amount of various test procedures and test data.


FET-2.0 dual-frequency dual-channel eddy current flaw detector'operating picture

Suzhou Desen Electronics Co., Ltd. is engaged in the research, development and production of fully automatic flaw detection systems for various tubes, rods, wires, plates, metal parts, and automotive parts, including various series of eddy current flaw detectors, sorting instruments, ultrasonic flaw detectors, magnetic particle flaw detectors, radiographic flaw detectors, and fully automatic penetrant flaw detection systems. It provides users with complete testing methods and processes to meet their requirements for rapid and complete testing of product quality and improving quality, The products are widely used in the electric power, aerospace, military, metallurgy, and mechanical manufacturing industries, especially in the non-destructive testing of tubes, rods, wires, plates, metal components, and automotive components.

In recent years, continuous achievements have been made, leading the introduction of multifunctional intelligent eddy current flaw detector, multi frequency eddy current flaw detector, dual frequency dual channel eddy current flaw detector, automatic tube and rod flaw detection system, automatic aircraft hub flaw detection system, etc. in China. The company, together with a number of universities and research institutes, has jointly developed high-speed flaw detectors, ultra-high-speed online eddy current flaw detectors, and a variety of fully automated flaw detection equipment, which has effectively promoted the development of China's testing industry. The various series of eddy current flaw detectors and fully automated flaw detection equipment produced are domestic brands, and their products are exported to Germany, the United States, the Middle East, Japan, South Korea, and other regions and are widely used in the metal manufacturing industry.

The company adheres to technological innovation and constantly develops high-performance eddy current flaw detectors, ultrasonic flaw detectors, fully automatic flaw detectors, and other products to meet user needs. We are willing to sincerely cooperate with users with a sincere spirit of dedication, and jointly occupy the international market in the process of globalization to create brilliance.