

Add to Cart
1. The module adopts the imported silicon controlled rectifier,
with the voltage withstand up to 1200V
2. The voltage regulator has a wave peak voltage absorption circuit
to effectively protect the high-power SCR for longer life
3. The voltage regulator can adjust the output low voltage through
the precise multi turn potentiometer
4. St original imported trigger diode
5. High quality CBB capacitor, withstand DC withstand voltage 630V
6. All potentiometers are equipped with nuts and can be used
without any components
7. Module size: 60mm * 48mm * 28mm
Input voltage: AC 220V
Voltage regulation: 50v-200v
Maximum power limit: 2000W
Maximum current limit: 25A
Note: the module is connected with 220V AC voltage, so pay
attention to safety during commissioning
Product application Connect the product in series in the circuit of
desk lamp or electric appliance, (i.e. disconnect any one of the
live line or zero line of desk lamp and electric appliance, and
connect the two lines of the "product") rotate the rotary rod of
potentiometer, which can play the role of light and shade
adjustment, speed regulation, voltage regulation and temperature
regulation. It is very convenient to use. The product is applicable
to: use the new bidirectional high-power thyristor, the current can
reach 25 A It
solves the problem of over-current caused by the electric furnace
wire, the resistance under the condition of cooling, can easily
adjust the output voltage of electricity, can be adjusted
arbitrarily between 50-220 volts, can be used by public appliances,
such as: the heat regulation of electric furnace and water heater,
the light regulation of lamps, the speed regulation of small motor,
the temperature regulation of electric soldering iron, etc., so as
to achieve the effect of light regulation, temperature regulation
and voltage regulation. The power available is less than The 2000
Watt large-scale electric appliance can be used
because of its large power, so the general household electric
appliance or small factory can be used enough. (the power of
inductive or capacitive load should be reduced. The voltage
regulator is equipped with two-way high-power SCR potentiometer
with nuts, but it can be used with any components, which is very
convenient and practical
-------------------------------------------------------------------------------------------------------------
Specification:
* Brand new
* Material: Semiconductor silicon controlled
* Size: approx. 85 * 55 * 38 mm
* Working Voltage: AC 220V
* Highest power: 4000 watt (connected resistive load, longtime use
show lower the power)
* Under 10amps current, does not need extra cooling.
* Over 10amps current, need add cooling fan.
* Voltage regulation: AC 10-input
Feature:
* Control the speed of a AC motor with this controller
* High temperature resistant FR - 4 circuit board
* Fine workmanship and stable performance.
* Durable in use.
* Used in electric furnace, water heater, lamps, small motor,
electric iron etc.
* Suitable for AC brush motor.
How to Use:
* Adjustable Power Supply Board, connect this device with lamp or
home appliance or electric circuit.
* Then rotate the knob for dimming, speed, voltage, temperature
control.
* Description:
The new component assembly
4 Terminals,220V into 10-220V adjustable output,Be sure to take the
load transfer
Mainly used:Thermostat,Dimming,Governor(Heating pipe, Heating wire
,Heating plate,Heating rods,Baisi bulb,Fan,EAF,Solder furnace,Table
lamp) and so on.
The regulator be suitable for 220V AC electrical , can be used to
dimming, voltage regulator, thermostat, speed and other purposes. I
t can also arbitrarily adjust the output voltage between 0-220V,
and can be used for 4000 watts or less electrical appliances.
Electrical parameters:
Voltage: AC 220V
Maximum power: 4000W
Voltage Regulator: AC 10-220V
Size:91*59*34mm
Thyristor current: 20A(Max)
Radiator: 5 thick corrugated surface aluminum radiator
Resistance: Full metal film, precision power resistors