original One relay module, delay power off, disconnect, trigger delay, cycle timing circuit switch, with USB

Product Description:

• One relay module, delay power off, disconnect, trigger delay, cycle timing circuit switch
• 0.1 second (minimum) ~ 999 minutes (maximum) continuously adjustable
• This product is easy to use and powerful, but buyers please read the operation instructions of this product in detail. It is a very practical product.

Module highlights:

• Wide voltage power supply (6~30V) supports micro USB 5.0V power supply, which is very convenient to use;
• The interface is clear and simple, powerful, easy to understand, and almost meets all your needs;
• There is a key emergency stop function (STOP key), with reverse connection protection, reverse connection does not burn;
• Added sleep mode, after enabling it, without any operation within 5 minutes, automatically turn off the display; any key to wake up;
• Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately;
• All setting parameters are automatically saved after power-off.

Operating mode:

• P1: After the signal is triggered, the relay is turned on for OP time and then turned off; during OP time, the following operations
• P1.1: Signal is invalid when triggered again
• P1.2: The signal is triggered again to re-timing
• P1.3: The signal triggers the reset again, the relay is disconnected, and the timing stops;
• P-2: Give the trigger signal, after the relay is turned off for CL time, the relay is turned on for OP time, after the timing is completed, the relay is turned off;
• P3.1: Give the trigger signal, after the relay is turned on for the OP time, the relay will disconnect for CL time, and then cycle the above actions, give the signal again in the cycle, the relay will disconnect, and stop timing; the number of cycles (LOP) can be set;
• P3.2: There is no need to trigger signal after power-on, the OP time when the relay is on, and the CL time when the relay is off, the above actions are cycled; the number of cycles (LOP) can be set;
• P-4: Signal hold function. If there is a trigger

Shenzhen Creatall Electronics Co.,Ltd was founded in 2004,is a leading manufacturer and supplier of various modules, specializing in power supply modules, amplifier audio modules,BMS battery protection modules, Bluetooth modules,PWM motor speed controller,Lcd led Inverter board,voltmeter and other related PCB&PCBA products. We have a dedicated team of experienced engineers and designers who can provide customized ODM and OEM services to meet the specific requirements of our customers.

With rich experiences to make a variety product with 1,000 square meter warehouse 2,000 square meter factory and 600 square meter office. We have more than 200 employees and strong R&D, QC department

Our products exported to North America,Southeast Asia,Middle East,Latin America, Europe and other countries and regions, and with a number foreign enterprises to establish a long-term stable cooperative relations

Our products offer reliable and efficient solutions for a variety of applications, from industrial automation to consumer electronics. At Creatall, we are committed to delivering innovative and high-quality products that meet the highest standards of performance.

Whether you need a standard product or a customized solution, Creatall is your trusted partner for all your module needs