Sealed 12V Digital LED Display On/Off Timer Relay Switch Board for PCB Manufacturing
Brand Name:creatall
Model Number:1 channel relay module
Minimum Order Quantity:10 pieces
Place of Origin:Guangdong, China
Theory:Time Relay
Use:PCB
Contact Now
Add to Cart
Verified Supplier
Address:
Address:Floor 2nd.Bldg B. Xin Mao Industrial Zone,Xia Wei Industrial Area, Long Hua District, Shen Zhen City,Guang Dong Province. China
Supplier`s last login times:
within 43 hours
Product Details
Company Profile
Product Details
Contact Us
Products Description
original One relay module, delay power off, disconnect, trigger
delay, cycle timing circuit switch, with USB One relay module,
delay power off, disconnect, trigger delay, cycle timing circuit
switch 0.1 second (minimum) ~ 999 minutes (maximum) continuously
adjustable This product is easy to use and powerful, but buyers
please read the operation instructions of this product in detail.
It is a very practical product. Module highlights: 1. Wide voltage
power supply (6~30V) supports micro USB 5.0V power supply, which is
very convenient to use; 2. The interface is clear and simple,
powerful, easy to understand, and almost meets all your needs; 3.
There is a key emergency stop function (STOP key), with reverse
connection protection, reverse connection does not burn; 4. Added
sleep mode, after enabling it, without any operation within 5
minutes, automatically turn off the display; any key to wake up; 5.
Different OP, CL, LOP parameters can be set, these parameters are
independent of each other and saved separately; 6. All setting
parameters are automatically saved after power-off. Operating mode:
P1: After the signal is triggered, the relay is turned on for OP
time and then turned off; during OP time, the following operations
P1.1: Signal is invalid when triggered again P1.2: The signal is
triggered again to re-timing P1.3: The signal triggers the reset
again, the relay is disconnected, and the timing stops; P-2: Give
the trigger signal, after the relay is turned off for CL time, the
relay is turned on for OP time, after the timing is completed, the
relay is turned off; P3.1: Give the trigger signal, after the relay
is turned on for the OP time, the relay will disconnect for CL
time, and then cycle the above actions, give the signal again in
the cycle, the relay will disconnect, and stop timing; the number
of cycles (LOP) can be set; P3.2: There is no need to trigger
signal after power-on, the OP time when the relay is on, and the CL
time when the relay is off, the above actions are cycled; the
number of cycles (LOP) can be set; P-4: Signal hold function. If
there is a trigger signal, the timer is cleared and the relay
remains on; when the signal disappears, the relay is disconnected
after timing the OP; during the timing, there is another signal,
and the timer is cleared; Product parameters: 1: Working voltage:
6-30V support micro USB 5.0V power supply 2: Trigger signal source:
high-level trigger (3.0V-24V) The signal ground and the system
ground are not in the same ground to improve the anti-interference
ability of the system (also can be short-circuited to the common
ground) 3: Output capacity: can control equipment within DC 30v 5A
or AC 220v5A 4: Quiescent current: 20mA Working current: 50mA 5:
Service life: more than 100,000 times; working temperature:
-40—85°C; size: 6.2*3.8*1.7cm 6: With optocoupler isolation,
enhanced anti-interference ability, industrial grade circuit board,
set parameters forever after power off memory. Special attention:
The relay output is a passive contact, uncharged output, which
controls the on-off function of a line.
Timing range 0.1 second (minimum) ~ 999 minutes (maximum)
continuously adjustable How to choose the timing range: After
setting the parameter value in the mode selection interface, short
press the STOP button to select the timing range; XXX. The decimal
point is in the ones place, timing range: 1 second to 999 seconds
XX.X The decimal point is in ten's place, timing range: 0.1 second
to 99.9 seconds X.X.X. All decimal points are lit, timing range: 1
minute to 999 minutes For example, if you want to set the OP to 3.2
seconds, move the decimal point to the tenth place, and the digital
tube will display 03.2 Parameter description: OP on time, CL off
time, LOP cycle times (1—999 times, "---" represents infinite
cycles) These parameters are independent of each other, but all
modes share these parameters. For example, when the on-time OP is
set to 5 seconds in P1.1, and the user wants to switch to P1.2
mode, then enter P1.2 to set the corresponding parameters, OP It
will also be 5 seconds; On the main interface (display 000), short
press the SET button, OP (CL, LOP) and the corresponding time XXX
will be displayed; If there is only OP (such as mode P1.1, P1.2,
P1.3) time in the mode, then short press the SET key will only
display OP and the corresponding time; If there are OP, CL, LOP in
the mode (such as mode P3.1, P3.2), short pressing the SET key will
display OP and corresponding time, CL and corresponding time, LOP
and corresponding times; After setting the mode, you can easily
view the parameters set in the current mode by short pressing the
SET button on the main interface, which is very convenient! How to
set parameters 1. First determine the working mode of the relay; 2.
According to the working mode of the relay, in the main interface
(when the module is powered on, it will flash the current working
mode (default P1.1 mode), and then enter the main interface) "Long
press the SET button for 2 seconds and then release ”Enter the mode
selection interface, and select the mode to be set by short
pressing the UP and DOWN buttons (P1.1~P-4); 3. After selecting the
mode to be set (for example, P3.2), short press the SET button to
set the corresponding parameters. At this time, the parameters to
be set will flash (OP on time, CL off time, LOP cycle times ("-- -"
represents an infinite cycle)), adjust the parameter value through
UP and DOWN, support long press (rapid increase or decrease) and
short press (increase or decrease by 1 unit); after setting the
parameter value, short press the STOP button To select the position
of the decimal point, select the timing range (corresponding time
0.1 second to 999 minutes); short press the SET key to set the next
parameter of the current mode, the process is the same as above; 4.
After setting the parameters of the selected mode, press and hold
the SET button for 2 seconds and release it. The currently set mode
will flash, and then return to the main interface. The parameter
setting is successful, very simple! Main interface: "000" (no
decimal point) is displayed when the relay is not working, and
there is a decimal point when the relay is working, which is very
clear! Mode selection interface: Long press the SET button to
enter, after the setting is completed, long press the SET button to
exit and return to the main interface, very simple!
STOP button function expansion: Relay enable mode: 1. ON: The relay
is allowed to conduct during OP conduction; 2. OFF: The relay is
forbidden to conduct and is always off; Short press the STOP button
on the main interface to switch between ON and OFF, the current
state will flash, and then return to the main interface. (This
function is an emergency stop function, one key to open and close
the relay) Sleep mode: 1. C-P sleep mode: within five minutes,
without any operation, the digital tube automatically turns off the
display, and the program runs normally; 2. O-d normal mode: the
digital tube is always on for display; Press and hold the STOP
button for 2 seconds and then release it to switch between C-P and
O-d states. The current state will flash, and then return to the
main interface.
Company Profile
Certificates & Production Processes
Packing & Delivery
1. Normal packaging.
2. Export carton.
3. Custom packing.
4. All orders are will be shipped within 3-25 days after customers
confirmed payment.
Payment&Shipping
PAYMENT Standard payment terms: pay 30% deposit in advance, 70% balance
before shipment. Online trade assurance order, all is up to you.
More payment terms could be provided! (T/T,PAYPAL WESTERN UNION) SHIPPING After-sales Service: 100% strict inspection and test before
shipment. Replace in one weekonce original defective goods found on
arrival. Enjoy one year warranty.
Customer Reviews
This is a part of good feedback from our customer, all is 5 star.
It is prove that we are excellent supplier and also prove we own
high quality products and professional services.
high quality products and professional services.
FAQ
Q: What is the minimum order quantity for your products? A: If you need a small order, please contact us Q: How long is your delivery time? A: The product will be sent within 3 days after payment is
confirmed, and the delivery time is 3 to 6 days Q: Do you test or inspect all items before delivery? A: Yes, we tested and checked all items before shipment. Q. What is your warranty? A: 60 days after receiving the goods. Our products are 100% tested
before being shipped. If the goods are defective, please notify us
within 3 days after delivery. Any item must be returned as is to be
eligible for a refund or payment. The buyer is responsible for all
freight incurred. Q: How do I pay for the order? A: We accept wire transfer, Western Union, Pay Pal, moneygram,
escrow (if you prefer other methods, please contact us)
Sealed 12V Digital LED Display On/Off Timer Relay Switch Board for PCB Manufacturing
Inquiry Cart
0