Temperature Control Board with TEC Driver

Remarks: NE/NE-AH/NC use 10k NTC temperature sensor by default, PT100 or PT1000 are optional, other models only support NTC.

1. Details of STXF-TCB-NE-AH:

STXF-TCB-NE-AH is a temperature control board for semiconductor refrigeration chips (also known as thermoelectric coolers TEC), which contains a complete PID control. It has continuous output mode, and the temperature control accuracy can reach 0.01 degree. This device supports the most commonly used 10k NTC temperature sensor, TEC can have multiple configurations, and the power supply is DC power supply. This board is the high current version of STXF-TCB-NE. It is suitable for high-power and high-precision temperature control, such as high-power LD.

Features:

• PID control algorithm
• High accuracy, down to 0.01 degree
• Wide range of TEC voltage: 2~24V
• Large TEC current range: rated 18A (if the supply voltage is less than or equal to 12V, the current can reach 24A)
• Two-way control, support heating and cooling
• TEC configuration is flexible
• It can set and detect the temperature through the serial port (ASCII code protocol, supports the computer with its own super terminal, everyone can use it)
• It has alarm, ready signal output, and close TEC signal input
• Control mode: continuous voltage

Applications:

• Temperature control system with TEC (semiconductor cooler, thermoelectric cooler) as the temperature control element
• Suitable for but not limited to temperature control of laser diodes
• Suitable for various fields such as industry and home appliances
• Biological, medical, PCR temperature control, etc.

Main technical parameters:

• Board supply voltage: 7.5- 27V (standard voltages such as 7.5/12/15/24 are recommended, the TEC rated voltage is preferably equal to or slightly larger than the power supply voltage, if the TEC rated voltage is less than the power supply voltage, you can also set the maximum output ratio)
• Board supply current: determined by the actual maximum power of the TEC
• TEC voltage: 2V – 24V (depending on power supply voltage)
• TEC current: rated 18A (If power supply voltage is less than or equal to 12V, the current can reach 24A)
• Temperature control sensor: 10k NTC (default B value is 3950, the actual B value is not limited, only affects absolute temperature, not relative temperature, basically meaningless for temperature control), PT100 optional
• Temperature control accuracy: 0.01°
• Setting temperature accuracy: 0.01°
• NTC version temperature control measurement range: -60 - +170 degrees
• NTC version control temperature range: -20 - +100 degrees
• PT100/PT1000 temperature control measurement range: -60 - +212 degrees
• PT100/PT1000 control temperature range: -50 - +200 degrees
• Default factory setting temperature: 25°, or user specified
• Working ambient temperature: -40 to +45 degrees
• Storage ambient temperature: -40 to +60 degrees
• Working environment humidity: 0-95%
• Dimensions: 65mm*95mm, Height: 35mm

Ordering Information:

• Product name: temperature control board
• Product model: STXF-TCB-NE-AH/-X
• -X: Optional PT100 or PT1000 probe, omitting -X means that NTC probe is supported by default
• For example: TXF-TCB-NE-AH, TXF-TCB-NE-AH-PT100, TXF-TCB-NE-AH-PT1000

Control Method:

The board uses serial communication to modify and monitor information. There are three control methods as follows:

• The temperature control display unit made by us such as STXF-DISP-TCB (connect the serial port of the temperature control board to the display screen)
• Our PC software STXF-TCBMate (connect the serial port of the temperature control board to the computer)
• Directly use the serial port to issue command control (using a microcontroller, or a PC)

2. Related products and accessories for temperature control panel:

Details of STXF-DISP-TCB(DW) Temperature Control Display Board:

The STXF-DISP-TCB(DW) temperature control display board supports STXF-TCB-NA, STXF-TCB-NE/NE-AH, STXF-TCB-SA and other temperature control boards. The temperature value and various related parameters can be set through the temperature control display board, and the current temperature control information can be seen intuitively. The temperature control display board can be used as a setting tool for the temperature control board, or can be directly installed on the panel as the monitoring interface of the temperature control board.

Features:

• It can be easily installed on the customer's equipment panel
• Support STXF-TCB full range of temperature control boards
• Support the setting of various parameters
• Support temperature display as a curve
• It has a 7-28V power input port, and a 5V power input/output port and you can supply power through one of them

Ordering Information:

• Product name: temperature control display board
• Product model: STXF-DISP-TCB/-P(DW) -P: A -P suffix means a black panel. If there is no panel, it will be omitted directly.
• For example: STXF-DISP-TCB(DW), STXF-DISP-TCB-P(DW)

Electrical connection diagram:

High Quality, Low Price & Good Service

Wuhan Sintec Optronics -- One-stop Shop for Optics, Lasers, Machines & Parts

Wuhan Sintec Optronics Co. Ltd is a China-based supplier and fabricator of laser cutting machines, laser welding machines, laser marking machines, laser cleaning machines, optical components, lasers and laser parts. We provide various high-quality, low-price lasers & optics for OEM and end users. The company is managed by experienced professionals with engineering, management & servicing backgrounds.

Our main products are fiber laser cutting machines, fiber laser welding machines, laser marking machines, and laser cleaning machines. We also provide lasers, optics & laser parts - CO2 laser, green laser, fiber laser module, DPSS laser, microchip laser, Q-switch, AOM, AO deflector & frequency shifter, laser lamp (arc lamp and flashlamp), CW & pulsed laser power supply, Nd: YAG rod, beam expander, scan lens (f-theta lens), focusing lens, mirror, the output coupler, power meter, laser diode, diode driver, diode module, CNC control software, laser marking head, marking software, green laser pointer, pump chamber, lamp-pumped cavity, laser safety goggles, chiller, table & stage, WDM.

We are a leading company in Optics Valley of China to provide quality laser systems & optical components and excellent services at attractive prices. We always try our best to make our products reliable, safe, easy to use, flexible, and economical. We believe our continuing advances in technologies will make us the best choice to provide the solutions to make you remain competitive and be a leader in your own field.

Many innovative technologies have been developed through our R&D. The robot 3D laser cutter and small high precision CNC tube fiber laser cutter have reached the level of first-class in the world. It is the most advanced machining tool for high-speed cutting of arc and hole positions of irregular pipes. This has also completely changed the domestic technology level of this industry and has allowed Sintec Optronics to lead the market. In addition, Wuhan Sintec Optronics is one of the earliest laser equipment technology research and development and production manufacturing enterprises in China with the ability to vertically integrate materials, devices, and entire machines.

The company’s mission is to provide one-stop shop for optics, lasers, machines & parts. We are glad to provide high cost-effective products and high-quality service for our customers.

Motto
Superior quality, competitive pricing, professional service

Mission
Our purpose is to develop solutions to solve engineering problems using laser technology.
We connect our competencies as laser specialists to create solutions for academia and industry.

Philosophy
Creative and open work environment