Reverse Osmosis Water Filter System Municipal Drinking Water Treatment

Brand Name:CHONGYANG
Certification:ISO ,CE
Model Number:CY-RO-10000L/H
Minimum Order Quantity:1
Delivery Time:With 30-40 Days
Payment Terms:L/C, T/T
Contact Now

Add to Cart

Site Member
Location: Shanghai Shanghai China
Address: 308 # T9 Build CHENJIN Noble Realm,No.1700 CaoYang Road, PuTuo Area ,Shanghai,China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Product Name:Full Stainless Steel Food And Beverage Water Treatment RO Mineral Water Purification Plant


What is the configuration of reverse osmosis system :


The configuration of a reverse osmosis (RO) system can vary depending on the specific application and requirements, but the basic components typically include:

Pre-filtration stage: In this stage, the water is passed through one or more pre-filters to remove large particles, sediment, and other contaminants that could damage the RO membrane.

High-pressure pump: The pre-filtered water is then pressurized by a high-pressure pump to force it through the RO membrane.

Reverse osmosis membrane: The heart of the RO system is the semi-permeable membrane, which allows water molecules to pass through while rejecting dissolved salts, minerals, and other contaminants.

Post-filtration stage: After passing through the RO membrane, the water may be subjected to additional filtration to remove any remaining particles or contaminants.

Storage tank: The purified water is stored in a tank until it is needed.

Delivery system: A faucet or other delivery system is used to dispense the purified water.

In addition to these basic components, an RO system may also include various sensors, monitors, and control systems to ensure optimal performance and monitor water quality.


The Partial Product Specification:


Type

Capacity

(M3/H)

Pipe DN

(mm)

WP

(MPa)

MaterialWork Method
CY-RO-0.250.25DN20≤1.0Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-0.50.5DN20≤1.0Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-11DN25≤1.0Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-22DN32≤1.0Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-33DN40≤1.0Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-55DN50≤1.0Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-1010DN75≤1.0Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-2020DN100≤1.6Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-3030DN125≤1.6Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-4040DN150≤1.6Stainless Steel/Carbon SteelFull Auto/Semi Automatic
CY-RO-5050DN200≤1.6Stainless Steel/Carbon SteelFull Auto/Semi Automatic



FAQ:

1.Question:How often should I replace the filters in a reverse osmosis system?

Answer:As a general guideline, it's recommended that the pre-filter and post-filter be replaced every 3-6 months.


2.Question:How to maintain the big capacity Reverse Osmosis System ?

Answer: 1.Regularly check the system for leaks 2.Monitor water pressure 3.Inspect and clean the pre-filters.


3.Question: How to install RO Plant?

Answer:Install the RO system equipment, including pre-filters, pumps, membranes, and post-filters, according to the manufacturer's instructions and any applicable regulations,we can provide video by wechat ,whatsapp number on-line .


4.Question: Where is the CHONGYANG Water located ?

Answer: SHANGHAI ,JIANGSU


China Reverse Osmosis Water Filter System Municipal Drinking Water Treatment supplier

Reverse Osmosis Water Filter System Municipal Drinking Water Treatment

Inquiry Cart 0