

Add to Cart
Product Name:Reverse Osmosis System for Food & Drinking Industry
Overview of food stuff &beverage industry
Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove ions, large particles, and other impurities from water.
A reverse osmosis system typically consists of a pre-filter, a reverse osmosis membrane, a post-filter, and a storage tank. The pre-filter is designed to remove large particles, such as sediment and chlorine, that can damage the reverse osmosis membrane. The reverse osmosis membrane is the heart of the system and is responsible for removing dissolved solids, such as minerals, salts, and other impurities. The post-filter is designed to remove any remaining impurities and improve the taste and odor of the water. The storage tank stores the purified water until it's needed.
The Partial Product Specification:
Type | Capacity (M3/H) | Pipe DN (mm) | WP (MPa) | Material | Work Method |
CY-RO-0.25 | 0.25 | DN20 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-0.5 | 0.5 | DN20 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-1 | 1 | DN25 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-2 | 2 | DN32 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-3 | 3 | DN40 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-5 | 5 | DN50 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-10 | 10 | DN75 | ≤1.0 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-20 | 20 | DN100 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-30 | 30 | DN125 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-40 | 40 | DN150 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
CY-RO-50 | 50 | DN200 | ≤1.6 | Stainless Steel/Carbon Steel | Full Auto/Semi Automatic |
FAQ:
1.Question:How often should I replace the filters in a reverse osmosis system?
Answer:As a general guideline, it's recommended that the pre-filter and post-filter be replaced every 3-6 months.
2.Question:How to maintain the big capacity Reverse Osmosis System ?
Answer: 1.Regularly check the system for leaks 2.Monitor water pressure 3.Inspect and clean the pre-filters.
3.Question: How to install RO Plant?
Answer:Install the RO system equipment, including pre-filters, pumps, membranes, and post-filters, according to the manufacturer's instructions and any applicable regulations.
4.Question: Where is the CHONGYANG Water located ?
Answer: SHANGHAI ,JIANGSU