Digital Tech Pediatric SpO2 Disposable Sensor White Foam For ECG1200G PM50 PM60D

1.Product Name

Contec Creative Digital Tech Pediatric white foam Disposable SpO2 Sensor for ECG1200G PM50 PM60D

2. Instructions Of Disposable Spo2 Sensor

Before using, make sure you understand all the precautions listed.
Before use, check the sensor for dirt or rust. If so, this should be done after cleaning or wiping. If necessary, replace the oxygen probe. The finger being tested should be kept clean.

1. The best site for testing is the index finger. If the location on the index finger is inappropriate or unusable, another finger may be used as the test site;
2. Place the index finger on the measurement port of the oximetry probe. on the tip of the finger. Ensure that the red light from the LED passes through the patient's tissue;
3. secure the cable with tape in the direction of the back of the hand to prevent the probe from falling off;
4. Connect the oximeter and the extension cable to the device according to the device's instruction manual. Check that the oximeter is working properly according to the prompt message.

3. Technical Parameters

LED/PD: 660/905/940

Emission Wavelength: 660nm(±5nm)

Absorption Wavelength: 905nm(±5nm)

Spo2 Test Range: 70%-100%

Spo2 Accuracy: ±1%(90%-100%), ±3%(70%-89%)

Pulse Rate Test Range: 30-245bpm

Pulse Rate Accuracy: ±1 bpm(30-59bpm), ±2 bpm(60-149bmp),

±3 bpm(150-245bmp

4. OEM Part Number Cross References:

5. Compatibility:

6. Other Models :

7. Company Product :

Reusable SpO2 Sensor

Disposable SpO2 Sensor

SpO2 Adapter Cable

ECG Cable and Leadwires

EKG Cable and Leadwires

ECG Holter Cablel and Leadwires

ECG Trunck Cable 3/5/10 Lead

ECG Leadwires 3/5/10Lead

ECG Electrodes and ECG/EKG Accessories

Radiatranparent ECG Cable and Leadwires

Temperature Probe and Adapter Cable

IBP Cable and Adapter Cable and Disposable IBP Transducer

NIBP Cuff and NIBP Adapter Hose Tube

EEG Electrodes Leadwires

Spare parts and semi-sinished cables

8. Certificates