0.03um UF System Reinforced Ultrafiltration Uf Membrane Filter

Brand Name:CNKHONG
Model Number:KH-UF-SFX2880
Minimum Order Quantity:10
Delivery Time:10 days
Payment Terms:T/T
Place of Origin:China
Contact Now

Add to Cart

Verified Supplier
Location: Hangzhou China
Address: Bldg 10-1, # 11 Lingang Rd, Renhe Street, Yuhang Dist, Hangzhou, China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Reinforced Ultrafiltration(UF) for River Water Purification with 0.03um pore size


Ultrafiltration or membrane filtration is a water filtration technology based on membranes and pressure to separate particles in suspension and colloidal matter from water.

Nominal diameter of micropores in ultrafiltration membranes is around 0.03 μm, what provides a good balance between filtration and permeability and provides a barrier against bacteria and most virus.

Current quality standards for water supplies in drinking and industrial applications have increased the use of ultrafiltration (membrane filtration), which delivers higher filtrate quality than conventional sand, gravel and anthracite pressure filters.

Ultrafiltration is also widely used as a in integrated membrane filters as pretreatment to reverse osmosis plants, reducing the RO membrane fouling risk and before water disinfection. By physically removing bacteria and pathogens ,ultrafiltration can also reduce significantly the downstream Chlorine dosing.

The main benefits of ultrafiltration opposed to other conventional filtration technologies are:

  • Capacity to cope with variable feedwater quality, delivering a consistent filtrate independently of the feedwater characteristics
  • Higher filtrate quality than tradicional sediment filters: 0.1 NTU and 99.999 bacteria removal
  • Smaller plant footprint with up to 50% reduction compared to traditional media filters.
  • Simpler design than standard media filters
  • Lower chemical consumption and environmental impact than standard media filters


Size and weight


ModelKH-UF-4040W-PVDFKH-UF-6040W-PVDF
Module Diameter ( A, mm)Φ90 mmΦ160 mm
Module Length ( B, mm)960mm960mm
Module Length (C, mm)1106 mm1304 mm
Size of Inlet/Outlet (D, mm)DN25DN32
Operating TypeOutside to InsideOutside to Inside
Membrane Area8.0 m220 m2
Dry weight of the module5 Kg12 Kg

Parameters

Shell materialUPVCUPVC
Membrane MaterialPVDFPVDF
Membrane pore size0.03μm0.03μm
Inner diameter of the hollow fiber0.7 mm0.7 mm
Outer diameter of the hollow fiber1.3mm1.3mm
Turbidity of Permeating water≤ 0.2NTU≤ 0.2 NTU

SDI value of permeating water


≤ 3≤ 3

Flux rate of purified water

(0.10MP,20℃)

≥1000L/H≥3000L/H

Typical Process


Temperature Range5-45 ℃5-45 ℃
PH Value Range2-132-13

Permeating Flux rate for different

Water

40 - 80 l/m2/hr40 -80 l/m2/hr
Operating Pressure≤0.12 MPa≤0.12MPa
Maximum Inlet Pressure0.2 MPa0.2MPa
Backwashing flux rate

1.5-2.0 times of

Permeating Flux

1.5-2.0 times of

Permeating Flux

Backwashing timesOnce per 30-120 minutesOnce per 30-120 minutes
Chemical cleaning online during backwashingOnce per 7-14 daysOnce per 7-14 days



The whole installation and application process of our MBR modules are described as the following photo:




China 0.03um UF System Reinforced Ultrafiltration Uf Membrane Filter supplier

0.03um UF System Reinforced Ultrafiltration Uf Membrane Filter

Inquiry Cart 0