Dsp Integrated Circuit IC Chip ADAU1701JSTZ-RL Audio Processor Ic Two ADCs Four DACs

dsp integrated circuits ADAU1701JSTZ-RL 28-56 Bit Audio Processor Two ADCs and Four DACs

SigmaDSP 28-/56-Bit Audio Processor with Two ADCs and Four DACs

> Applications

Multimedia speaker systems

MP3 player speaker docks

Automotive head units

Minicomponent stereos

Digital televisions

Studio monitors

Speaker crossovers

Musical instrument effects processors

In-seat sound systems (aircraft/motor coaches)

> Features

28-/56-bit, 50 MIPS digital audio processor

2 ADCs: SNR of 100 dB, THD + N of −83 dB

4 DACs: SNR of 104 dB, THD + N of −90 dB

Complete standalone operation

Self-boot from serial EEPROM

Auxiliary ADC with 4-input mux for analog control

GPIOs for digital controls and outputs

Fully programmable with SigmaStudio graphical tool

28-bit × 28-bit multiplier with 56-bit accumulator for full double-precision processing

Clock oscillator for generating a master clock from crystal PLL for generating master clock from 64 × fS, 256 × fS, 384 × fS, or 512 × fS clocks

Flexible serial data input/output ports with I2S-compatible, left-justified, right-justified, and TDM modes

Sampling rates of up to 192 kHz are supported On-chip voltage regulator for compatibility with 3.3V systems 48-lead, plastic LQFP

> Description

The ADAU1701 is a complete single-chip audio system with a 28-/56-bit audio DSP, ADCs, DACs, and microcontroller-like control interfaces. Signal processing includes equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, speaker compensation, and stereo image widening.

This processing can be used to compensate for real-world limitations of speakers, amplifiers, and listening environments, providing dramatic improvements in perceived audio quality. Its signal processing is comparable to that found in high end studio equipment. Most processing is done in full 56-bit, double precision mode, resulting in very good low level signal performance. The ADAU1701 is a fully programmable DSP.

The easy to use SigmaStudio™ software allows the user to graphically configure a custom signal processing flow using blocks such as biquad filters, dynamics processors, level controls, and GPIO interface controls. ADAU1701 programs can be loaded on power-up either from a serial EEPROM through its own self-boot mechanism or from an external microcontroller.

On power-down, the current state of the parameters can be written back to the EEPROM from the ADAU1701 to be recalled the next time the program is run. Two Σ-Δ ADCs and four Σ-Δ DACs provide a 98.5 dB analog input to analog output dynamic. Each ADC has a THD + N of −83 dB, and each DAC has a THD + N of −90 dB. Digital input and output ports allow a glueless connection to additional ADCs and DACs. The ADAU1701 communicates through an I 2 C® bus or a 4-wire SPI port

> Specifications

> Trading Guide

Shipping:

---Delivery period: For in-stock parts, orders are estimated to ship out in 3 days,Once shipped, estimated

delivery time depends on the below carriers you chose:

» DHL Express, 3-7 business days.
» DHL eCommerce,12-22 business days.
» FedEx International Priority, 3-7 business days
» EMS, 10-15 business days.
» Registered Air Mail, 15-30 business days.

---Shipping rates: After confirming the order, we will evaluate the shipping cost based on the weight of the

goods.

---Shipping option: We provide DHL, FedEx, EMS, SF Express, and Registered Air Mail international shipping.

---Shipping tracking: We will notify you by email with tracking number once order is shipped.

Returning warranty:

---Returning: Returns are normally accepted when completed within 30 days from date of shipment.Parts

should be unused and in original packaging. Customer has to take charge for the shipping.

Warranty:

---All Retechip purchases come with a 30day money back return policyThis warranty shall not apply to any

item where defects have been caused by improper customer assembly, failure by customer to follow

instructions,product modification, negligent or improper operation.

Ordering:

---T/T,PayPal, Credit Card includes Visa, Master, American Express.

Shenzhen Retechip® Electronic Technology Co., Ltd. was established in 2013, specializing in electronic components distribution business.The products are widely used in communication equipment, power supply, medical electronics, automotive electronics, digital electronics, industrial electronics, display modules, intelligent electronics, new energy, the Internet of things, 5G productsand other fields，With high-quality products, reasonable prices, rapid distributionand timely service, we can provide customers with the most cost-effective products and save customers a lot of time.