AM3352BZCZD80 MPU ARM Cortex-A8 32Mbit 800 MHz 1.26V PBGA-324

AM3352BZCZD80 MPU ARM Cortex-A8 32Mbit 800 MHz 1.26V PBGA-324

Features

• Up to 1-GHz Sitara™ ARM® Cortex® -A8 32‑Bit RISC Processor

– NEON™ SIMD Coprocessor

– 32KB of L1 Instruction and 32KB of Data Cache With Single-Error Detection (Parity)

– 256KB of L2 Cache With Error Correcting Code (ECC)

– 176KB of On-Chip Boot ROM

– 64KB of Dedicated RAM

– Emulation and Debug - JTAG

– Interrupt Controller (up to 128 Interrupt Requests)

• On-Chip Memory (Shared L3 RAM)

– 64KB of General-Purpose On-Chip Memory Controller (OCMC) RAM

– Accessible to All Masters

– Supports Retention for Fast Wakeup

• External Memory Interfaces (EMIF)

– mDDR(LPDDR), DDR2, DDR3, DDR3L Controller:

– mDDR: 200-MHz Clock (400-MHz Data Rate)

– DDR2: 266-MHz Clock (532-MHz Data Rate)

– DDR3: 400-MHz Clock (800-MHz Data Rate)

– DDR3L: 400-MHz Clock (800-MHz Data Rate)

– 16-Bit Data Bus – 1GB of Total Addressable Space

– Supports One x16 or Two x8 Memory Device Configurations

– General-Purpose Memory Controller (GPMC)

– Flexible 8-Bit and 16-Bit Asynchronous Memory Interface With up to Seven Chip Selects (NAND, NOR, Muxed-NOR, SRAM)

– Uses BCH Code to Support 4-, 8-, or 16-Bit ECC

– Uses Hamming Code to Support 1-Bit ECC

– Error Locator Module (ELM)

– Used in Conjunction With the GPMC to Locate Addresses of Data Errors from Syndrome Polynomials Generated Using a BCH Algorithm

– Supports 4-, 8-, and 16-Bit per 512-Byte Block Error Location Based on BCH Algorithms

• Programmable Real-Time Unit Subsystem and Industrial Communication Subsystem (PRU-ICSS)

– Supports Protocols such as EtherCAT® ,PROFIBUS, PROFINET, EtherNet/IP™, and More

– Two Programmable Real-Time Units (PRUs)

– 32-Bit Load/Store RISC Processor Capable of Running at 200 MHz

– 8KB of Instruction RAM With Single-Error Detection (Parity)

– 8KB of Data RAM With Single-Error Detection (Parity)

– Single-Cycle 32-Bit Multiplier With 64-Bit Accumulator

– Enhanced GPIO Module Provides ShiftIn/Out Support and Parallel Latch on External Signal

– 12KB of Shared RAM With Single-Error Detection (Parity)

– Three 120-Byte Register Banks Accessible by Each PRU

– Interrupt Controller (INTC) for Handling System Input Events

– Local Interconnect Bus for Connecting Internal and External Masters to the Resources Inside the PRU-ICSS

– Peripherals Inside the PRU-ICSS: – One UART Port With Flow Control Pins, Supports up to 12 Mbps

– One Enhanced Capture (eCAP) Module

– Two MII Ethernet Ports that Support Industrial Ethernet, such as EtherCAT

– One MDIO Port • Power, Reset, and Clock Management (PRCM) Module

– Controls the Entry and Exit of Stand-By and Deep-Sleep Modes

– Responsible for Sleep Sequencing, Power Domain Switch-Off Sequencing, Wake-Up Sequencing, and Power Domain Switch-On Sequencing

– Clocks

– Integrated 15- to 35-MHz High-Frequency Oscillator Used to Generate a Reference Clock for Various System and Peripheral Clocks

– Supports Individual Clock Enable and Disable Control for Subsystems and Peripherals to Facilitate Reduced Power Consumption – Five ADPLLs to Generate System Clocks (MPU Subsystem, DDR Interface, USB and Peripherals [MMC and SD, UART, SPI, I 2C], L3, L4, Ethernet, GFX [SGX530], LCD Pixel Clock)

Functional Block Diagram

Specifications

Trading Guides

Shenzhen Retechip® Electronic Technology Co., Ltd. was established in 2013, specializing in electronic components distribution business.The products are widely used in communication equipment, power supply, medical electronics, automotive electronics, digital electronics, industrial electronics, display modules, intelligent electronics, new energy, the Internet of things, 5G productsand other fields，With high-quality products, reasonable prices, rapid distributionand timely service, we can provide customers with the most cost-effective products and save customers a lot of time.