

Add to Cart
260 kW Biogas Natural Gas Engine Electricity Generator Natural Gas
Generator
The 260kW natural gas generator set continuous power is 200kW,
rated voltage 380V, 50Hz, power factor 0.8.
Gas Engine
Deutz V6 natural gas engine are used in for the generator. The gas
engine is deeply developed in fuel control systems to improve its
electric efficiency, reliability and fuel adaptivity for certain
working conditions.The development also give consideration for
dynamic responsiveness, fuel economy, reliability and safety.
Proven gas engine is controlled by imported gas close-loop
lean-burn control system which includes high energy ignition
system, gas-exclusive speed regulator, fuel flow rate control
valve, variable Venturi mixture. The system is also optimized by
our company to achieve high reliability and efficiency.
Alternator
High performance, reliable and efficient brushless AC synchronized
mecc alte ECO38 alternator is selected to ensure optimized
performance of the generator set.
Technical Parameters
S.N. | Item | Specification |
1 | Genset | 260kW Natural Gas Generator |
1.1 | Model | 260kW |
1.2 | Rated Power | 260kW |
1.3 | Rated Current | 451A |
1.4 | Rated Voltage | 230/380V |
1.5 | Rated Frequency | 50Hz |
1.6 | Continuous Power | 210kW |
1.7 | Start Mode | DC24V Electric Start |
1.8 | Regulation Mode | Electric regulation |
1.9 | Fuel Control | Lean-burn, close-loop control |
1.10 | Ignition | Electronic control single cylinder independent high energy ignition |
1.11 | Operation Type | One-button start/stop |
1.12 | Lubricant Consumption | ≤0.3g/kWh |
1.13 | Power Generation | ≥3.75 kWh/Nm³(Standard Natural Gas) ≥2.0 kWh/Nm³(Bio-gas with methane more than 55%) |
1.14 | Genset Dimension | 5500×3000×2800mm |
1.15 | Genset Weight | 6800kg |
2 | Engine | |
2.1 | Brand | HuaChai Deutz |
2.2 | Model | V6 |
2.3 | Displacement | 11.9 |
2.4 | Intake | Turbo-charger, forced inter-cooling, four-valve |
2.5 | Rated rpm | 1500 |
2.6 | Cooling Method | Water Cooling |
2.7 | Lubrication | Pressurized splash lubrication |
2.8 | Lubricant Temperature | ≤108℃ |
3 | Alternator | |
3.1 | Brand | Mecc alte |
3.2 | Mode | ECO38-2L4 |
3.3 | Power Factor | 0.8(lag) |
3.4 | Generating Efficiency | 93.7% |
3.5 | Capacity | 300kVA |
3.6 | Phase | 3-phase, 4-wire |
3.7 | Insulation Grade | H |
3.8 | Protection Grade | IP23 |
4 | Generator Set Control System | |
4.1 | Brand | DEIF |
4.2 | Model | AGC200 |
4.3 | Function of Controller | One key start/stop, automatic monitoring/recording, multilevel protection |
4.4 | Displayer | rpm / lubricant pressure/ water temperature/ running hours/ current/ voltage/ frequency/ battery voltage/ active power/ reactive power/ load distribution proportion |
4.5 | Protection | Auto control and warning for high water temperature, low lubricant pressure, over-speed, over-current, ac/dc low or high voltage |
5 | Canopy | Ski-mounted canopy, forced ventilation |
1. The parameters are based on low heat vale 35.88MJ/Nm3 fuel and
conform to ISO8528/1, ISO3046/1, BS5514/1. |