Flexible grounding body HD-R10Y is mainly used in grounding network
buried resistance reduction; the original metal grounding body
corrosion effect is relatively poor, in addition is not suitable
for mountainous areas, especially rocky areas to use,
Construction of flexible grounding body
(5) Open the two external bags of raw materials and add them to the
liquid and stir well, and take them to the edge of the ditch, or
the pit, to be used.
(6) As vertical pouring can be poured directly.
(7) If you do horizontal pouring, you need to keep stirring slowly
until the resistance of the liquid in the barrel increases and
becomes sticky like porridge, then pour it into the trench to wrap
the horizontal grounding body and form a long line of pouring while
pouring.
(8) wait for its solidification to form with elastic grounding
conductor, at this time will no longer dissolve in water, can be
backfilled, the construction of flexible Hunan Hertz-Ohm
Engineering Group Co., Ltd. 4 grounding body thus ended
(9) Backfill the grounding trench, and clean up the site garbage,
measure the qualified can record the results and then leave the
site. Flexible grounding body horizontal laying diagram: Hunan
Hertz-Ohm Engineering Group Co., Ltd. 5 Scope of application Use is
not limited by environmental conditions,suitable for all areas
requiring resistance reduction.
Hunan Hertz-Ohm Engineering Group Co., Ltd. 6 Technical parameters
table Name Type Resistivity (Ω) Shock test (rate of change) Work
frequency test (rate of change) Corrosion test galvanized flat iron
Resistance reduction effect Coefficient Retardation factor Flexible
grounding body test results HD-R10Y 1.38 0.70% 2.60% 0.0022 0.16
0.833 Standard requirements HD-R10Y 5 20% 20% 0.03 0.7-0.8 0.8-0.9
The use is not restricted by environmental conditions, as long as
the construction can be received according to the amount of
resistance reduction effect, long service life, resistance
reduction effect is stable. A remarkable feature of flexible
grounding body HD-R10Y is that it can be formed in irregular shape
and the effective contact area formed between it and the medium, so
as to obtain a very good resistance reduction effect. This is what
no grounding pole and grounding module can do in the past.