

Add to Cart
EPP series AC power lightning protector consists of multiple single
lightning protection chips, which can be freely combined into
single-phase or three-phase protection for different power
distribution systems to prevent damage to low-voltage power
equipment from inductive overvoltage or operational
overvoltage.EPP65T is usually used for secondary protection.
Surge protective device, protect against lightning surge voltages in solar system (photovoltaic
power supply system).
These units must be installed in parallel on the dc networks to be protected and provide common
and different modes protection. Its installed location are recommended at both ends of the dc
power supply line (solar panel side and inverter/converter side), especially if the line routing is
external and long.
This series of surge protector device(SPD)is suitable for new energy solar power generation system, and the maximum continuous working voltage is DC500V, 800V, 1000V, 1200V. The installation position is in the DC power supply system to protect indirect lightning current, direct lightning current or other transient overvoltage.
Surge protective device, protect against lightning surge voltages
in solar system (photovoltaic power supply system).
These units must be installed in parallel on the DC networks to be
protected and provide common and different modes protection. Its
installed location are recommended at both ends of the DC power
supply line (solar panel side and inverter/converter side),
especially if the line routing is external and long.
High energy MOVs equipped with specific thermal disconnectors and
related failure indicators.