Add to Cart
OEM Top Quality Bendable Walkie Talkie Antenna Uhf Walkie Talkie Antenna
What do you need to pay attention to?
1: Do not use fake antennas (the quality is not guaranteed), and if
there is a diamond antenna, you can use the association antenna.
Ensure that the antenna has a standing wave ratio below 1.5. And it
is very suitable to ensure that the reactance is matched.
2: The antenna cannot be used upside down. After being down, it
stays in waves and destroys the machine.
3: The antenna cannot be pushed into the room for use, and it will
also cause high standing waves. I also hate the human body.
4: Try not to always have an antenna, which will cause poor contact
over time to produce high stay waves, which will affect the life of
the machine.
5: When it is raining, pay attention to the joints not to enter the
water, if the water enters, the standing wave height will be
permanent. Also pay attention to the inspection of the joints at
ordinary times. Is there any loose condition?
6: Frequently check the feeder outlet car end, there is no
accident, if the disconnection intention fails, because it will
cause the appearance of electric waves, permanent waves, and
endanger the human body. If it is 100%, it can't be launched.
7: Bicycle transmission or short-distance communication power will
also increase the life of the car. It is also good for your health.
Product Information
Product Name | Long range walkie talkie small size fm uhf antenna |
Model | BIO-B026 |
Frequency Range | 27.205MHz |
Gain | 1-4dBi |
V.S.W.R | 1.8:1 Max |
Impedance | 50 Ohm |
Polarization | Linear Vertical |
Cable | / |
Connector | BNC type(Optional) |
Size | dia 15*192mm |
Durable plastic materialwith good performance
Omni-directional rediationwith sensitive reception
Advantages &special
•Direct factory have better control in the quality and lead time of
Antenna Shipment
•All production operations comply with ISO 9001:2015 international
quality standards.
We also have RoHS, CE, and REACH certifications available for All the Antennas.
•8 R&D engineers with more than 15 years of Antenna industry
experience
•OEM/ODM high-end customized service to meet the requirements of
different customers.
•24H /7D after sales services
FAQ
Q : Do you offer samples?
A : Yes, we offer samples for testing.
Q : How do you test your prouducts?
A : We use network analyzer (Agilent 8714ET/HP-8714ET) to test the
antennas’
VSWR,lmpedance,Smith Chart and Frequency in the simulation
environment.
And conducting instrument to test the cable.
Q : How far your company from Shenzhen?
A : It only takes 30 minutes from Luohu railway station to
Changping railway station by
CRH China Railway High-speed.
Q : Do you have RoHS certification?
A : We can do RoHS certifiction according to customers’
requirements.
The customers need to charge the handing fee.Or we can provide
customers the SGS report of the
material for free.