1100W Electric Ratchet Pipe Threader Z1T-50AF Multi Purpose

High quality pipe threading tools electric ratchet pipe threader Z1T-50AF

Introduction

This machine is applicable to cutting, threading and inner hole chamfering (the chamferer is optional) of pipes for water, electricity and gas, and has the copying device able to automatically cut the standard taper pipe thread, with a reliable clamping device and an advanced cooling & lubrication system. Therefore, adopting this machine can lengthen the service life of the threading die, and avoid the deformation & slipping of the pipe clamp, so as to obtain the high-quality taper pipe thread. This machine is widely used in equipment installation, building and other industries, regarded as the ideal equipment to improve work efficiency, accelerate project progress, guarantee project quality and reduce labor intensity. (It is an ordinary round-steel threading machine, only applicable to the ordinary round-steel threading. The operating mode and machine structure are basically the same.)

Features

1. 1100W copper sensing motor, small noise, long use life, fulfillment of full-dimension thread at one time.
2. Exclusive hard tooth-surface high-speed gearbox, with small noise, long use life and high efficiency.
3. Jagged hammer panel design, firm clamp pipe, convenient operation.
4. Standard collocation of 50A multi-functional die head, die is replaced to process the round steel and wire pipe thread.
5. Double guide post cutting knife is accurate and durable.
6. Enhance type guide post trunnion can upgrade the stable properties of machine.
7. Large modulus oblique gear main shaft gear, super-large torque for easy transmission.
8. Selection of high efficiency, quality and performance-price ratio.

Technical data

Detail photos

Operation guide:

A. Threading:

(1) Pull the cutting knife frame and chamferer; put down die head to touch the copying block. After reliable positioning of die head, press the button to start the machine.

(2) Rotate the pipe in anti-clockwise direction, rotate the hand wheel of cutting feed, and make die head get close to the pipe.

(3) Apply force to the hand wheel of cutting feed, until die head makes 3 ~4 threads on the pipe.

(4) Then, loosen the hand wheel of cutting feed, so the machine starts automatic threading. When roller of die head goes over copying block and falls down, threading die will open automatically and the threading is completed (Z¹₃ T–M18 threading machine is required to turn back to make the threading die exit). Z1T–50A threading die shall be loosened manually.

(5) Machine halt. Return to the carriage, until the whole die head exits pipe end. Pull out die head, lock the handle and pull up the die head.

You can also search this product by below words:

High quality pipe threading tools electric ratchet pipe threader Z1T-50AF
High quality pipe threading tools electric ratchet pipe threader
China Factory Direct Sales 1100W Metal Longlife Portable Automatic Pipe Threading Machine
China Manufacture New Arrivals Automatic Electric Portable 1100W Metal Rolling Pipe Threading Machine ZT-50AF

Common Faults and Solutions

FAQ

1. How to get a accurate quotation from us?
Provide us the detail of the material such as metal thickness and width.
2. What’s the shipping cost from China to your country?
We can send machine to your port or door address by sea or airplane. Please kindly tell us your nearest port or address with postcode.We have reliable shipping agent to insure the safe, convenient and timely delivery.
3. Payment terms, MOQ, warranty, FOB?
Payment terms: 30% TT paid in advance, the balance of 70% before the shipment.
Minimum order quantity: 1 set.
FOB :Shanghai/Ningbo
Delivery time :7 days after receipt of formal order and 30% deposit.
Warranty:12 months.
4. What’s the package?
Fumigation-free plywood case.
5. What about commissioning service?
We can offer commissioning service, the buyer need to afford plane tickets.
6. What’s policy for guarantee and broken parts?
Warranty period of equipment lasts a year, during which the broken parts and spares caused by quality can be offered free.
7.Any question, call us or send email, we will try our best to satisfy you.

A high-tech enterprise of pipe welding equipment

Hangzhou Suntech Machinery Co., Ltd. is one of the earliest professional enterprises engaged in the research, development and production of Plumbing tools in China. The company covers an area of 20000 square meters and owns various production plants of 30,000 square meters. It is one of the largest HDPE pipe welding equipment manufacturers in China.

After more than twenty years of development, the company has casting, machining, painting, sheet metal, packing workshops and so on. The main products include a full range of HDPE butt welding machine, Hydraulic pipe welding machine, Manual butt fusion machine, CNC welding machine, electrofusion, fitting welding machine, HDPE/PPR pipe cutting tools, pressure test pumps as well as a variety of special construction tools.

The products have been widely used by domestic pipe, pipe fitting manufacturers, gas and water companies and professional construction companies, etc., and have won wide favor in the domestic and international markets with their excellent cost performance and reliable quality.

After years of development, our company have accumulated rich experience in technology development, enterprise management, production and sales, cultivated an excellent and professional team. And we have established a good cooperative relation with HDPE/PPR pipe companies, polyethylene pipe users, professional construction companies, and it is useful on our product development, technological innovation and product upgrading advanced.

To produce quality pipe welding equipment, and let the world has no difficulty on welding of pipes. It is our eternal pursuit!