

Add to Cart
Fertilizer Sand EP250 EP300 Inclined Conveyor Belts
Skirt conveyor belts are divided into two types: conveyor belts with skirts and no clapboards and conveyor belts with skirts and clapboards. It can continuously convey all kinds of bulk materials at an arbitrary inclination angle of 0-90 degrees, with a large conveying inclination angle, a wide range of use, and a small area. The features of no transfer point, reduced civil construction investment, low maintenance cost, and large conveying capacity solve the conveying angle that cannot be achieved by ordinary conveyor belts or patterned conveyor belts. The corrugated sidewall conveyor belt can be designed as a complete conveyor system according to the requirements, avoiding the lifting system of intermittent conveying and complex conveying.
1. Classification of skirt conveyor belts
Skirt conveyor belts are divided into two types: conveyor belts
with skirts and no clapboards and conveyor belts with skirts and
clapboards. Various bulk materials can be continuously conveyed at
an arbitrary inclination angle of 0-90 degrees, with a large
conveying inclination angle, a wide range of use, and a small
footprint. The features of no transfer point, reduced civil
construction investment, low maintenance cost, and large conveying
capacity solve the conveying angle that cannot be achieved by
ordinary conveyor belts or patterned conveyor belts. The corrugated
sidewall conveyor belt can be designed as a complete conveyor
system according to the requirements, avoiding the lifting system
of intermittent conveying and complex conveying.
The corrugated sidewall conveyor belt can transport all kinds of
bulk materials in horizontal, inclined, vertical and variable-angle
directions, from coal, ore, sand to fertilizer and grain.
The particle size of the material is not limited, from a small
particle size to a large particle size of 400mm, and the conveying
capacity can be from 1 cubic meter/hour to 6000 cubic meters/hour.
2. Baseband
The base tape is composed of four parts: upper cover rubber, lower
cover rubber, belt core and lateral rigid layer. The thickness of
the upper cover rubber is generally 3-6mm; the thickness of the
lower cover rubber is generally 1.5-4.5mm. The core material bears
the tensile force, and the material can be cotton canvas (CC),
nylon canvas (NN), polyester canvas (EP) or steel wire rope (ST).
In order to increase the lateral rigidity of the base belt, a
special reinforcement layer is added to the core, which is called a
lateral rigid layer. The width specification of the base tape is
the same as that of the ordinary tape, and it meets the standard
requirements of GB/T7984-2001.
><
Variety | Standards and main indicators |
Ordinary steel cord conveyor belt | GB/T9770-2001 |
Flame-retardant steel cord conveyor belt | MT668-1997 |
General flame-retardant steel cord conveyor belt | MT668-1997 |
Heat-resistant steel cord conveyor belt | HG2297-92 |
Wear-resistant steel cord conveyor belt | Shaoboer wear amount ≤90mm 3 |
Acid, alkali and oil resistant steel cord conveyor belt | HG4-846 HG4-846 |
Cold-resistant steel cord conveyor belt | Brittleness temperature -40℃ |