

Add to Cart
Black Steel cord conveyor belt ST800 Wire Rope Conveyor Belt
Wire rope conveyor belt is a rubber conveyor belt with steel wire as the skeleton. It has the advantages of high tensile strength, good impact resistance, long life, low elongation, good trough forming, and good flexural resistance. It is suitable for long-distance, long-haul, and high-speed transportation of materials. The product is composed of core rubber, steel wire rope, covering layer and edge rubber.
1. Purpose
Wire rope conveyor belt is suitable for material transportation
under tear-proof conditions required by coal mines, mines, ports,
electric power, metallurgy, building materials and other
industries. It can be used for long-distance, large-span,
large-volume and high-speed material transportation.
2. The form of damage
There are many forms of damage to the wire rope conveyor belt,
mainly: serious wear on the rubber surface; ripped edges; tearing.
Among them, conveyor belt tearing is the most harmful form of
damage. It mainly refers to the longitudinal tearing of the
conveyor belt caused by the sharp impurities in the conveying
material being inserted into the conveyor belt or the steel wire in
the conveyor belt is drawn out. Although the tearing of the
conveyor belt is an accidental damage, it is very destructive. If
it is not controlled in time, it will cause the entire conveyor
belt to tear (accidents of tearing the conveyor belt of thousands
of meters occur from time to time in the port), which will cause
production shutdown , Bringing huge direct and indirect economic
losses to the port. Therefore, the protection and detection of the
tearing of the conveyor belt have always been paid attention to by
the conveyor belt manufacturers and users. At the same time, the
relevant national standards also require that the conveyor belt
should be installed to prevent longitudinal tearing and tearing
detection devices.
3. Classification
1) Divided by structure: ordinary type and impact-resistant and
tear-resistant type.
2) Divided by purpose: In addition to ordinary types, there are
also types of wear resistance, heat resistance, cold resistance,
acid and alkali resistance, flame retardancy, tear resistance,
flame resistance, and ozone resistance.
3) Variety: According to the performance of the covering rubber, it
can be divided into: ordinary steel cord conveyor belt,
flame-retardant steel cord conveyor belt, heat-resistant steel cord
conveyor belt, wear-resistant steel cord conveyor belt,
cold-resistant steel cord conveyor belt, Acid and alkali resistant
steel cord conveyor belts, oil resistant steel cord conveyor belts,
flame retardant steel cord conveyor belts and other varieties. The
strength is higher than that of ordinary conveyor belts, and the
length is longer, which can reduce the number of transfer points
and save power and management costs.
><
Variety | Standards and main indicators |
Ordinary steel cord conveyor belt | GB/T9770-2001 |
Flame-retardant steel cord conveyor belt | MT668-1997 |
General flame-retardant steel cord conveyor belt | MT668-1997 |
Heat-resistant steel cord conveyor belt | HG2297-92 |
Wear-resistant steel cord conveyor belt | Shaoboer wear amount ≤90mm 3 |
Acid, alkali and oil resistant steel cord conveyor belt | HG4-846 HG4-846 |
Cold-resistant steel cord conveyor belt | Brittleness temperature -40℃ |