Grey Cast Iron 295x24mm Disc Large Brake Kit BMW E36 328i

Jekit Red Brake Caliper BMW E36 328i 295x24mm Grooved Disc Kit

What is a Brake Caliper?

A caliper is part of the disc brake system, the type most cars have in their front brakes.

The brake caliper houses your car’s brake pads and pistons. Its job is to slow the car’s wheels by creating friction with the brake rotors.

The brake caliper fits like a clamp on a wheel’s rotor to stop the wheel from turning when you step on the brakes. Inside each caliper is a pair of metal plates known as brake pads.

When you push the brake pedal, brake fluid creates pressure on pistons in the brake caliper, forcing the pads against the brake rotor and slowing your car.

How are Brake Calipers Connected to the rest of the Braking System?

The caliper assembly generally lives inside the wheel and is connected to the master cylinder through tubes, hoses, and valves that conduct brake fluid through the system. We could go on about brake calipers for days on end, but we’ll show some restraint. Here’s what you really need to know: your brake calipers are very important.

When to Replace Brake Calipers?

Over time in normal driving conditions, the heat generated from the braking system can weaken and break down seals inside the calipers.

They can become rusty, contaminated or dirty, and start to leak brake fluid if you don’t drive regularly.

However, you should have your brakes checked immediately if you experience any of the following:

Your brakes are continuously squeaking, squealing or grinding

Your brake or antilock braking system (ABS) warning light comes on

Your car jerks or pulls to one side when braking

You need to pump your brakes for them to work properly

Your brake pedal feels unusually soft and spongy or hard

You notice brake fluid leaks around the wheels or engine compartment

What does the brake system include?

The major brake system components include the brake pedal, brake booster, brake master cylinder, brake lines and hoses, brake calipers and pistons, disc brake pads or brake shoes, disc brake rotors or brake drums, brake fluid, anti-lock brake system (ABS) control module, wheel speed sensors, and there are many more

How do I know if my brake discs are worn?

A grinding sound: If you hear a grinding noise when you brake, it could mean your brake pads or discs need replacing. Brake pads include a metal wear indicator that make a noise when it contacts the brake disc. When your pads are worn to this extent, it is likely you will need to replace the discs too.

If less than 3mm of the brake pad is visible, then they need to be replaced. Vibrations: If you feel your car vibrating as you brake, it is a sign that your brake discs might be abnormally worn or have suffered thermal damage following severe braking.

How do I check brake disc conditions?

When you check your disc brakes, measure the thickness of the linings on the pads so that you can tell whether the linings on your brakes are badly worn. If the lining is down to the thickness of the steel backing plate, the pads should be replaced.

How often do you need to change brake discs?
You can find this information in the vehicle handbook or by querying with your car manufacturer. As a rough estimate, you can expect your brake discs to have a lifetime of around 80,000 – 120,000 miles

Can you replace brake pads without discs?

We are often asked why brake discs cannot be replaced without replacing the pads at the same time. ... The main reason is that if you don't replace brake discs and pads together, your brand new discs will wear unevenly and can get damaged

If you notice any of these issues, contact us to schedule an appointment for our Brake Service & Repair.

Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience and is a trusted supplier. The company has production equipment and skilled front-line employees. Our boss has been engaged in the transformation of automobile braking system since 2011, have about 10 years of experience in this industry. Since 2017, we have set up our own factory, which can provide you with the best price and the best quality products. We specialize in producing aluminum alloy center cap and bracket, which can be customized according to different car models. Meanwhile we also sell complete set brake kit included brake calipers/brake disc rotors/brake pads/brake hose/aluminum center cap and brackets. Our products have strict quality control from the procurement of raw materials to the sale of finished products. Our company purpose is customer first, trying our best to meet the needs of customers. Our company's products are sold worldwide. With excellent quality and reasonable value, quality service, to win the trust and praise of our customers . Warmly welcome to visit our company and factory. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits. We are looking forward to receiving your enquiry soon.