Car Brake System Dual Rear Caliper GT4 BELFE For Toyota Wilfa

Jekit Car Brake System Dual Caliper GT4 BELFE For Toyota Wilfa

BELFE Motor Operation Guide

The parking brake usually refers to the manual brake installed on the motor vehicle, referred to as the handbrake, which is used to stabilize the vehicle after the vehicle is stopped and avoid accidents caused by slipping when the vehicle is parked on a slope road. The common handbrake is generally placed in the drooping position of the driver's right hand, which is easy to use. Some automatic transmission models on the market are equipped with a foot brake with the same function as the handbrake on the outside of the driver's left foot, and some advanced models are also equipped with an electronic parking brake system.

To apply the parking brake, press down on the brake pedal and pull the parking brake lever all the way up. To release the parking brake, press down on the brake pedal, pull the parking brake lever up slightly, press the button on the handle end with your thumb, and lower the parking brake lever to its original position.

For cars equipped with automatic transmissions, be sure to apply the parking brake before moving the gear lever to the "P" (park) position. When parking on an incline, if you shift into the "P" position before applying the parking brake, the weight of the body will make it difficult to shift out of the "P" (park) gear when you are ready to start the car.

When preparing to start the vehicle, the gear lever should be shifted out of the "P" (park) position before releasing the parking brake.
Do not tighten the parking brake when driving the car, otherwise the rear brake will be reduced due to overheating, the brake life will be shortened or permanent brake damage will occur.

If the parking brake does not hold the car stably, or does not release completely, ask your dealer or service station to have it checked immediately. Always apply the parking brake fully before leaving the car, otherwise the car will move and cause injury or damage. When parked, make sure the shift lever is in neutral for manual transmission vehicles: leave the shift lever in the "P" (Park) or "N" (Neutral) position for automatic transmission vehicles, and most automatic transmissions The car ignition key can only be pulled out when the car is only in P gear. Unless there are special circumstances, it is strictly forbidden to park the car transmission in the forward gear (D, S, L or with Arabic numerals, etc.) or reverse gear (R) position.

When parking in extremely cold climates, the following procedures should be followed:
(1) Apply the parking brake.
(2) Put the shift lever of a manual transmission vehicle in the 1st gear or "R" (reverse gear) position; make the shift lever of an automatic transmission vehicle in the "P" (parking gear) position.
(3) Turn off the engine, get off the car, and put a plug under the wheel.
(4) Release the parking brake.
When you return to the park, you must remember to apply the parking brake first, then remove the plug

Product Form

reference picture

Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience and is a trusted supplier. The company has production equipment and skilled front-line employees. Our boss has been engaged in the transformation of automobile braking system since 2011, have about 10 years of experience in this industry. Since 2017, we have set up our own factory, which can provide you with the best price and the best quality products. We specialize in producing aluminum alloy center cap and bracket, which can be customized according to different car models. Meanwhile we also sell complete set brake kit included brake calipers/brake disc rotors/brake pads/brake hose/aluminum center cap and brackets. Our products have strict quality control from the procurement of raw materials to the sale of finished products. Our company purpose is customer first, trying our best to meet the needs of customers. Our company's products are sold worldwide. With excellent quality and reasonable value, quality service, to win the trust and praise of our customers . Warmly welcome to visit our company and factory. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits. We are looking forward to receiving your enquiry soon.