R410a Indoor Wall Mounted Air Conditioner 12000BTU DA Panel 220V

R410a Indoor Wall Mounted Air Conditioner 12000BTU DA Panel 220V​

DA Panel 220V R410a 12000BTU Split Type Air Conditioning Cooling Only High Quality Wifi Control PCB 3 Year Warranty

Indoor Wall Mounted Air Conditioner:

The air conditioner is accompanied by dehumidification during the refrigeration process. The relative humidity of the environment that people feel comfortable should be around 40-60%. When the relative humidity is too high, such as above 90%, even if the temperature is within a comfortable range, people still feel bad.

Why choose us?

Because of our scientifically designed and developed products, we have been welcomed by customers in a short period of time.

We have achieved complete customer satisfaction due to the following key

- The air filter should be cleaned regularly, otherwise the air flow will be blocked, resulting in insufficient air volume and increased room temperature

- To adjust the temperature during sleep, the air conditioner can automatically adjust the sleep temperature

- The outdoor unit must be installed firmly to reduce vibration and noise. There must be enough space in front of the suction and exhaust vents of the condenser for ventilation. If the wind is blocked, the condensation pressure will increase and it will cause shutdown;

- There should be no obstacles in front of the indoor unit, otherwise the wind will be affected;

When the air conditioner is running for rapid cooling, the selector switch can be adjusted to the high gear, and after the temperature drops, it can be adjusted to the medium-speed low gear;

- The ventilation switch can be used for the ventilation of the window air conditioner, but the ventilation time should not exceed 15 minutes;

In 2015, Yuetu moved to Ninghua from Wenzhou, and covering an area with 300,000 square meter. There are total 12 production lines with 3 million sets production capacity annually and 95% of the parts self produced, such as heat exchanger, welding, bending, automatic coating, plastic injection, and so on.