AT056TN53 Innolux Lcd Screen 5.6 Inch With Antiglare Surface

Touch Screen Innolux 5.6" TFT LCD Module AT056TN53

_{^{PRODUCT DESCRIPTION}}

Innolux's employees worldwide number more than 60,000, and its production sites and sales locations span the global.
With its major TFT plants located in Zhunan and Tainan, both in Taiwan, Innolux has also established overseas
module plants in the Chinese cities of Ningbo, Nanjing, Foshan, and Shanghai. Innolux's extensive global presence allows it to quickly provide a full range of services to its customers, reducing logistics and manpower costs, while achieving the environmental objectives of energy conservation and reduced carbon emissions. Innolux's unique intelligent management platform has not only enhanced the company's management capabilities, but also provides customers with prompt, accurate delivery information.
This is just one of the ways we are constantly striving to boost customer satisfaction.

PRODUCTS QUALITY ASSURANCE

1. High-quality raw material supplier
after-sales guarantee and long-term stable supplier, LCD panel and Driver IC made of A-regulated raw materials.

2. Other materials
such as polarizers, backlight film materials, etc. We also use brand new A-regulated raw materials

3. Strict quality control

Through rate up to 98.5%,Customer online defect rate as low as 0.3%.
Inspection is done in FOG==>LCM==>LCM+RTP/CTP==> production online inspection ==>Q.C inspection==>aging test 4 hours with load in 60 ℃ special room (as option)==>OQC.
A product must pass 5 tests before shipment: incoming inspection, 100% online inspection, QC on-site inspection, aging test and OQC inspection, etc.

Precautions For Use of LCD Modules

Handling Precautions

1) The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc.
2) If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water.
3) Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.
4) The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully.
5) If the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If still not completely clear, moisten cloth with one of the following solvents:
－Isopropyl alcohol
－Ethyl alcohol
Solvents other than those mentioned above may damage the polarizer. Especially, do not use the following:
－Water
－Ketone
－Aromatic solvents
6) Do not attempt to disassemble the LCD Module.
7) If the logic circuit power is off, do not apply the input signals.
8) To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.
9) Be sure to ground the body when handling the LCD Modules.
10) Tools required for assembly, such as soldering irons, must be properly ground.
11) To reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions.
12) The LCD Module is coated with a film to protect the display surface. Be care when peeling off this protective film since static electricity may be generated.
13) Storage precautions
14) When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps.
15) The LCD modules should be stored under the storage temperature range. If the LCD modules will be stored for a long time, the recommend condition is:
16) The LCD modules should be stored in the room without acid, alkali and harmful gas.

Transportation Precautions
The LCD modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine.

Shenzhen Haineneg Zhichuang Technology Co.,Ltd established in 2014, is a professional high- tech enterprise which is focusing on the development,production and service of LCD module technology. The annual R & D investment of the company exceeds 30% of the net profit.

The core team has more than 15 years of application experience in TFT LCD and touch screen industry.We company has two TFT fully automatic production lines and one semi-automatic production line, include 8000 square meters of industry standard dust-free workshop with sufficient production capacity. We focus on providing customers with overall display solutions, providing customers with reliable high-quality products, providing customers with high-quality pre-sales and after-sales technical support and services, and strive to lead the LCD industry. We company has large-scale production base,advanced production equipment,and a team of professional management and technicians.