

Add to Cart
Product Basic Parameters
Model: PE500*750
Motor power(kw): 55
Max feed size(mm): 425
Discharge range(mm): 50-100
Processing capacity(t/h): 45~80
Crushing Type: Primary Crusher, Coarse Crusher, Hard Rock Crusher
Technical Parameters Of Series Products
Model | Max feed size (mm) | Discharge range (mm) | Processing capacity (t/h) | Dimensions (L*W*H)(mm) | Theoretical weight (ton) | Motor power (kw) |
PE400*600 | 340 | 40-100 | 16~60 | 1670*1715*1580 | 6.5 | 30 |
PE500*750 | 425 | 50~100 | 45~80 | 2040*1926*1865 | 10.6 | 55 |
PE600*900 | 500 | 60~160 | 50~120 | 2350*1840*2320 | 15.5 | 55 |
PE750*1060 | 630 | 80~140 | 115~210 | 2680*2472*2840 | 29 | 110 |
PE800*1060 | 640 | 100-200 | 136-230 | 2730*2472*2840 | 30 | 110 |
PE870*1060 | 660 | 200~260 | 290~336 | 2660*2556*2800 | 31 | 110 |
PE900*1200 | 750 | 95~165 | 140~262 | 3335*3182*3025 | 50 | 160 |
PE1000*1200 | 850 | 195~265 | 315~342 | 3435*3180*3025 | 51 | 160 |
PE1200*1500 | 1000 | 150~300 | 400~800 | 4590*3732*3843 | 98 | 250 |
PEX-250*1000 | 210 | 25~60 | 16~52 | 1510*1965*1375 | 6.5 | 30-37 |
PEX-250*1200 | 210 | 25~60 | 20~60 | 1680*2192*1430 | 7.7 | 37 |
PEX-300*1200 | 250 | 20~90 | 16~105 | 1990*2320*1735 | 11 | 75 |
PEV-500*900 | 425 | 50~100 | 50~110 | 2047*1890*1945 | 10.9 | 55 |
PEV-600*900 | 500 | 70~130 | 80~170 | 2235*1857*2408 | 13.9 | 75 |
PEV-700*1060 | 650 | 80~140 | 115~220 | 2668*2205*2755 | 24.2 | 110 |
PEV-1000*1200 | 850 | 195~290 | 315~550 | 4478*2434*3430 | 160 |
Profile
PE series jaw crusher is a new type of jaw crusher that is
researched and developed by our company that we absorb advanced
technology, adopt progressive design methods, and combine many
years of practical experience. The series crusher can crush all
kinds of materials as long as the compressive strength is less than
320 MPA. The maximum feed size can reach 600/1000 mm.
Working Principle
The PEV Jaw Crusher is powered by a motor. Through the motor
pulley, the eccentric shaft is driven by the V-belt and the sheave,
so that the movable jaw reciprocates along the predetermined tracks
to crush materials inside the crushing cavity. Materials, after
being processed and reaching the standard, would be discharged from
the lower discharge opening.