

Add to Cart
21Ton Grain Drying Machine Cross Type 12% Moisture On Line Moisture Control
Production Information:
1, Using horizontal multi-slot dryer section, grain crisscrossed
loop cycle, hot exchange and evaporative way of drying to make sure
the drying is evenly and fully;
2, Prevent drying crack broken rice we adopt constant drying speed
control, drying rate and air temperature controlled by computer,
without manual settings;
3, Prevent grain spoiled, machine running under proper temperature
;
4, Prevent excessive drying adopting automatic, accurate and safe
water monitoring devices, it can be shut down automatic;
5, Body of tower is low and compact, easy to be installed;
6, High moisture rice and wheat quality also can be dried, widely
used for rice, wheat, corn, soybeans and other crops;
7, Safe, reliable, easy to be cleaned;
8, A variety of fuels available, economic, environmentally
friendly;
9, Easy to maintain, convenient to use;
10, Excellent quality raw materials for drying tower body, more
durable.
Parameters:
Model | 5H-21 |
Loading Capacity | 21 Tons |
Diemension Body (L×W×H)mm | 3480 x 4145 x 11437 |
Total weight(KG) | 5400 |
Voltage/ Frequence | Three Phase 380V, Single Phase220V/50HZ ( Or Customized) |
Total Motor Power (KW) | 13.7 |
Drying Rate (%/h) | 0.5-1.2% |
Broken Rate (%) | ≦0.5% |
Low Temperature Grain Dryer Working Principle:
Put the grain in the dryer per batch, then the grain will be circulated orderly by the interaction of electric parts and structural parts. The hot air from the husk burner gets into the drying layer to pass through and heat the grain under the action of single electric fan. The air flows draw the moisture out of the grain, then the exhaust gas discharges out of the machine with the suction of the exhaust fan. When the moisture reaches to the preset data, the drying process is over and then machines stop working.
Furnace Working Principle:
Put the fuels, such as rice hull, straw and anthracite into the furnace to burn, then to generate heat. The smoke gets into the heat exchanger and discharges outside after many cycles. At the same time the cold air is heat upt through the heat exchanger outside, then discharges out of the dryer. It can increase the thermal efficiency, save energy and reduce cost greatly.
Services Before Delivery
1. Customize the machines exactly.
2. Test all machines functions and features, make all can work well.
3. Design the plant drawing for the rice mill production line according to customers’ land.
Services After Sales
1. Assistance in constructing the factory plant for rice milling production line.
2. Repairing and maintenance during warranty period.
3. Assistance in installing the rice milling production line
4. Assitance in training staffs to operate the machines