Two Slots Dia 9mm Self Tapping M9 Thread Insert For Magnesium

High Precision Fasteners 302 Self Tapping Thread Insert With Two Slots

Introduction

Self-tapping threaded sleeve braces also called self-tapping, is a new type of reinforcing the strength of the threaded fasteners, self-tapping threaded sleeve has inner and outer tooth pattern, embedded in plastic, cast iron, aluminum, copper and other soft material, can be formed relatively High-strength internal threaded holes, self-tapping screw sleeves (self-tapping braces) can also repair damaged internal threads.
Self-tapping threaded sleeve mounted without prior tapping, installation tool can be used directly screwed into specific holes in the base material reserved for the female thread teeth have been crushed and the original can be used the same screw, economic appearance, the new articles It can also increase the thread strength.

Self-tapping screw sets (self-tapping braces) are now widely used in the automotive industry, rail car industry, shipbuilding industry, household appliances, construction machinery, office machinery, electronic products, engineering plastics, high-end modular furniture, aluminum die-casting and other industries.

Self-tapping screws are generally classified iron teeth, finger F is a wood-type teeth, usually countersunk head, generally refers to a type A A dental tip end banquet i.e., B-type B generally refers teeth, i.e. flat end banquet.

Parameter

It is widely used in aerospace components, locomotive, high-voltage electrical appliances, automotive power, wind power, nuclear power, communication and electrical industries. It is used in aluminum, magnesium, copper alloy, plastic, plexiglass, plywood, steel, cast steel and cast iron to make it more tough and firm

Installation Precautions

1, processing for different materials, sizes refer to drilling, pre-drilling. When the hardness of the corresponding material is high, please slightly increase the bottom hole in the drilling range.
2, one end of the slotted nut down, completely self-tapping threaded sleeve mounted into the tool, to be perpendicular to the contact with the workpiece. When installing (1～2 pitch), please make sure to align the bottom hole and never tilt. When you find that it is tilted, please do not reverse the tool and readjust it before use. After entering 1/3~1/2, you cannot start again. In addition, please do not rotate the tool in the opposite direction, otherwise it will cause the product to malfunction.
3. The self-tapping screw set should be at least 1mm lower than the surface of the part after matching

Xinxiang Flight Fastener Co., Ltd. is a professional manufacturer engaged in the design and manufacture of Thread Inserts, Self-Tapping thread inserts and other threaded fasteners. National high-tech enterprises. The company has independent technology development strength, advanced design level, automatic production equipment and high-precision detection equipment. Professional to provide customers with Thread Inserts, Self-Tapping thread inserts and other threaded fastener product design and use of the whole process of technical support. The company has passed ISO9001:2015 quality system certification. "AVIC-FLIGHT" brand was awarded the certificate of "famous brand in China" by China product quality evaluation center. The company has obtained more than 15 utility model patents and 12 software copyrights.

The company has more than 70 sets of processing equipment, mainly automatic equipment. The products are widely used in communication base station cooling device, automobile power transmission system, aerospace, aircraft, ship, wind power transmission system, national power grid transmission equipment, communication electronic equipment, medical equipment, heavy engineering machinery equipment, semiconductor high-end equipment and other fields.

The company can produce Thread Inserts products that meet the corresponding standards according to customer requirements. It can be produced according to MS21209, DIN8140, N926, ITN32760, MO-44421 and other standards.

The company's Thread Inserts cover Free running and Screw lock thread specifications in metric and English systems.Thread Inserts can be plated with Cd, Ag, Zn, Sn, green, red, blue and dry film lubrication. Self-Tapping inserts cover 302 / 303 and 307 / 308 thread specifications in metric and English systems. The materials are stainless steel 1.4305 (303), stainless steel 1.4301 (304), stainless steel 1.4401 (316), brass. Case hardened steel, zinc plated yellow chromed or zinc plated blue passaged.The company can produce 60 million pieces of inserts with various specifications every year, and provide all kinds of auxiliary tools.

Integrity management, scientific and technological innovation, and customers grow together to create brilliant.