ROHS 3d M10 M12 Metric Helicoil Kit Thread Insert Installation Tool

131Pcs Restoring Damaged Thread Insert Installation Tool M5 M6 M8 M10 M12

Installation tool

Special tools for wire thread inserts are required to install wire thread inserts, which mainly include special taps for wire thread inserts, wire thread insert installation wrenches, punches, unsleeve devices, and wire thread inserts internal thread bottom hole plug gauges. The taps are used for processing. The installation threaded bottom hole of the wire thread insert, the installation wrench is used for the installation of the wire thread thread insert, the punch is used for the punching of the mounting shank, the sleeve remover is used for the disassembly of the threaded sleeve, and the bottom hole plug gauge is used for the inspection of the bottom hole of the installation .

1. Bottom hole tap: used for the processing of the internal thread of the wire thread insert. Since the external thread of the wire thread insert is a non-standard thread, this type of tap is different in size from the ordinary M tap.

2. Installation wrench: used to install the wire thread insert in the threaded bottom hole. The basic principle is to make the wire thread thread

sleeve pass through a section of the guide thread to force the outer diameter of the wire thread thread sleeve to shrink so that it can be inserted into the bottom hole smoothly. It is divided into manual type And automatic type.

3. Breaker: The purpose of the breaker is mainly to break the installation handle of the wire threaded sleeve, especially for the through hole, the installation handle must be broken.

4. Sleeve remover: used to take out the threaded screw sleeve installed in the threaded hole of the base. For the screw sleeve that needs to be replaced after long-term use, and when it needs to be taken out due to improper installation or thread tripping during installation, etc. use.

5. Thread plug gauge: used to detect the internal thread bottom hole of the wire thread insert. After the wire thread insert is installed, the accuracy of the internal thread formed depends on the profile manufacturing tolerance of the wire thread insert and the internal thread bottom hole of the wire thread insert. tolerance.

Classification

Installation preparation tools: ST taps, CR-MO alloy drill bits, compressed air spray gun (optional)

Installation tools: ST special wrenches, which are divided into manual wrenches and automatic wrenches, among which manual wrenches are divided into simple wrenches and socket wrenches (commonly used);

Automatic wrenches are divided into electric wrenches and pneumatic wrenches (usually used for batch installation screw sleeves, mounting brackets can be equipped)

Breaking tool: Breaker, used to break screw sleeves with mounting handles, no tail screw sleeves do not need to be used

Removal tool: unloading device, used to remove the screw sleeve that failed to install

Installation steps

1. Drilling
The drill should be drilled with the size of do in the table. The depth of the drill should be greater than or equal to L. Be careful not to drill the hole into a cone shape. Do not use a drill with severe wear. Do not drop the chips into the place that may cause damage. After drilling, the countersinking with deburring properties is allowed, and the depth of the countersinking should not exceed 0.5. Excessive countersinking is not conducive to the installation of wire thread inserts.

2. Tapping
Select the special tap taps for ST wire thread inserts with corresponding thread specifications. The length of the tapping must exceed the effective thread depth of the wire thread inserts. All through holes must be tapped. The accuracy of the tapping will directly affect the tolerance of the final standard internal thread. With, according to the accuracy of the required internal thread, the tapping method and lubrication method should be selected appropriately, and the blind hole should be tapped with appropriate force to prevent the tap from breaking. After tapping, the threaded bottom hole must be cleaned. The compressed air spray gun can be used for cleaning. The blind hole can also be cleaned with a long spray gun with radial holes, which can be cleaned from bottom to top, or can be cleaned by direct cleaning.

3. Installation
When using a manual installation tool to install the wire thread insert, put the wire thread insert into the installation wrench, insert the mounting handle into the mandrel groove and turn the handle of the installation wrench so that the wire thread insert is screwed into the threaded bottom hole through the guide thread on the installation wrench, and Leave 0.5 to 0.75 turns of empty thread away from the surface of the base body. A small amount of wire thread inserts or coarse thread thread inserts of 14*2 or more can be installed with "T" type slotting or threaded head recommended tools for installation, but be careful not to apply a large axial force on the wire thread insert mounting handle. Prevent "random deduction". Electric or pneumatic installation wrenches can be used in assembly line assembly or where quick installation of wire thread inserts is required, but they must be operated skillfully to avoid wear of thread inserts and bottom holes. After the wire thread insert is installed, the corresponding level of plug gauge can be used to test the accuracy grade of the standard internal threaded hole formed, except for the locking wire thread insert.

4. Break the mounting handle
When passing through the hole, the wire thread insert mounting handle should be broken. Generally, use a breaker to align the mounting handle and use a hammer of about 200g to remove it. For coarse thread thread inserts above 18*2.5 and 14* For threaded thread inserts with fine teeth above 1.25, the mounting handle can be removed by bending up and down with needle-nose pliers.

5. How to remove the wire thread insert
When there is a problem in the installation process of the wire screw sleeve or the wire screw sleeve needs to be taken out because of the long use of the wire screw sleeve, the unscrew should be selected, put the unscrew into the hole of the wire screw sleeve, and align the handle of the unscrew with a hammer. One click, press down the handle and rotate it in the opposite direction to take out the wire thread insert. Keep in mind that the wire thread insert should not be pulled out directly during the removal process to avoid damage to the inner threaded bottom hole.

Installation inspection

After the wire thread insert is installed, the threaded hole tolerance zone depends on the profile manufacturing tolerance of the wire thread insert and the thread tolerance zone of the wire thread insert mounting hole. The former is controlled by the wire thread insert manufacturer, and the latter mainly depends on the tapping of the wire thread insert mounting hole. The wire precision usually forms 6H grade. When the precision is high, it can reach 5H and 4H tolerance bands. The unified thread standard is 2B and 3B. Corresponding level plug gauges can be used to detect the thread of the bottom hole.

Parameter

• Drill out damaged thread using correctly sized drill-bit(supplied)
• Tap re-drilled hole using tap supplied
• Load coiled insert into applicator
• Screw coil into casting
• Using lug breaking tool,break off tang on insert
• Thread is repaired and ready to use

Xinxiang Flight Fastener Co., Ltd. is a professional manufacturer engaged in the design and manufacture of Thread Inserts, Self-Tapping thread inserts and other threaded fasteners. National high-tech enterprises. The company has independent technology development strength, advanced design level, automatic production equipment and high-precision detection equipment. Professional to provide customers with Thread Inserts, Self-Tapping thread inserts and other threaded fastener product design and use of the whole process of technical support. The company has passed ISO9001:2015 quality system certification. "AVIC-FLIGHT" brand was awarded the certificate of "famous brand in China" by China product quality evaluation center. The company has obtained more than 15 utility model patents and 12 software copyrights.

The company has more than 70 sets of processing equipment, mainly automatic equipment. The products are widely used in communication base station cooling device, automobile power transmission system, aerospace, aircraft, ship, wind power transmission system, national power grid transmission equipment, communication electronic equipment, medical equipment, heavy engineering machinery equipment, semiconductor high-end equipment and other fields.

The company can produce Thread Inserts products that meet the corresponding standards according to customer requirements. It can be produced according to MS21209, DIN8140, N926, ITN32760, MO-44421 and other standards.

The company's Thread Inserts cover Free running and Screw lock thread specifications in metric and English systems.Thread Inserts can be plated with Cd, Ag, Zn, Sn, green, red, blue and dry film lubrication. Self-Tapping inserts cover 302 / 303 and 307 / 308 thread specifications in metric and English systems. The materials are stainless steel 1.4305 (303), stainless steel 1.4301 (304), stainless steel 1.4401 (316), brass. Case hardened steel, zinc plated yellow chromed or zinc plated blue passaged.The company can produce 60 million pieces of inserts with various specifications every year, and provide all kinds of auxiliary tools.

Integrity management, scientific and technological innovation, and customers grow together to create brilliant.