88 Pcs Hand Industrial Fastener M6 M8 M10 Thread Insert Repair Single Tools Kit

88 pcs Hand Industrial Fastener M6 M8 M10 Thread Insert Repair Single Tools Kit

Introduce

Thread repair kit is used to repair or replace damaged or peeled internal thread. There are 88 parts in the whole set of equipment, all of which are manufactured according to professional standards.

Package includes:

3-piece installation tool

3-piece mounting pin tool

One set of hexagon wrench

3-piece tap set

75 thread inserts

Dimension: M6, M8, M10

The specification can be changed according to customer's requirement.

Installation steps

1. Drilling
The drill should be drilled with the size of do in the table. The depth of the drill should be greater than or equal to L. Be careful not to drill the hole into a cone shape. Do not use a drill with severe wear. Do not drop the chips into the place that may cause damage. After drilling, the countersinking with deburring properties is allowed, and the depth of the countersinking should not exceed 0.5. Excessive countersinking is not conducive to the installation of wire thread inserts.

2. Tapping
Select the special tap taps for ST wire thread inserts with corresponding thread specifications. The length of the tapping must exceed the effective thread depth of the wire thread inserts. All through holes must be tapped. The accuracy of the tapping will directly affect the tolerance of the final standard internal thread. With, according to the accuracy of the required internal thread, the tapping method and lubrication method should be selected appropriately, and the blind hole should be tapped with appropriate force to prevent the tap from breaking. After tapping, the threaded bottom hole must be cleaned. The compressed air spray gun can be used for cleaning. The blind hole can also be cleaned with a long spray gun with radial holes, which can be cleaned from bottom to top, or can be cleaned by direct cleaning.

3. Installation
When using a manual installation tool to install the wire thread insert, put the wire thread insert into the installation wrench, insert the mounting handle into the mandrel groove and turn the handle of the installation wrench so that the wire thread insert is screwed into the threaded bottom hole through the guide thread on the installation wrench, and Leave 0.5 to 0.75 turns of empty thread away from the surface of the base body. A small amount of wire thread inserts or coarse thread thread inserts of 14*2 or more can be installed with "T" type slotting or threaded head recommended tools for installation, but be careful not to apply a large axial force on the wire thread insert mounting handle. Prevent "random deduction". Electric or pneumatic installation wrenches can be used in assembly line assembly or where quick installation of wire thread inserts is required, but they must be operated skillfully to avoid wear of thread inserts and bottom holes. After the wire thread insert is installed, the corresponding level of plug gauge can be used to test the accuracy grade of the standard internal threaded hole formed, except for the locking wire thread insert.

4. Break the mounting handle
When passing through the hole, the wire thread insert mounting handle should be broken. Generally, use a breaker to align the mounting handle and use a hammer of about 200g to remove it. For coarse thread thread inserts above 18*2.5 and 14* For threaded thread inserts with fine teeth above 1.25, the mounting handle can be removed by bending up and down with needle-nose pliers.

5. How to remove the wire thread insert
When there is a problem in the installation process of the wire screw sleeve or the wire screw sleeve needs to be taken out because of the long use of the wire screw sleeve, the unscrew should be selected, put the unscrew into the hole of the wire screw sleeve, and align the handle of the unscrew with a hammer. One click, press down the handle and rotate it in the opposite direction to take out the wire thread insert. Keep in mind that the wire thread insert should not be pulled out directly during the removal process to avoid damage to the inner threaded bottom hole.

Parameter

Why Choose Us?

1. A factory with more than 20 years' experience in manufacturing of Thread Inserts.

2. Competitive pricing & military quality.

3. Quick replies to quotations and requests for information.

4. Timely deliveries, rich experience in IMP and EXP.

5. Advanced R & D center, more than one thousand types of threaded inserts and tools.

6. Strict quality control system, passed the SGS and ISO9001: 2015.

7. Comprehensive after-sales support and troubleshooting.

8. Famous brands in China .

9. High quality enterprises in the region.

Xinxiang Flight Fastener Co., Ltd. is a professional manufacturer engaged in the design and manufacture of Thread Inserts, Self-Tapping thread inserts and other threaded fasteners. National high-tech enterprises. The company has independent technology development strength, advanced design level, automatic production equipment and high-precision detection equipment. Professional to provide customers with Thread Inserts, Self-Tapping thread inserts and other threaded fastener product design and use of the whole process of technical support. The company has passed ISO9001:2015 quality system certification. "AVIC-FLIGHT" brand was awarded the certificate of "famous brand in China" by China product quality evaluation center. The company has obtained more than 15 utility model patents and 12 software copyrights.

The company has more than 70 sets of processing equipment, mainly automatic equipment. The products are widely used in communication base station cooling device, automobile power transmission system, aerospace, aircraft, ship, wind power transmission system, national power grid transmission equipment, communication electronic equipment, medical equipment, heavy engineering machinery equipment, semiconductor high-end equipment and other fields.

The company can produce Thread Inserts products that meet the corresponding standards according to customer requirements. It can be produced according to MS21209, DIN8140, N926, ITN32760, MO-44421 and other standards.

The company's Thread Inserts cover Free running and Screw lock thread specifications in metric and English systems.Thread Inserts can be plated with Cd, Ag, Zn, Sn, green, red, blue and dry film lubrication. Self-Tapping inserts cover 302 / 303 and 307 / 308 thread specifications in metric and English systems. The materials are stainless steel 1.4305 (303), stainless steel 1.4301 (304), stainless steel 1.4401 (316), brass. Case hardened steel, zinc plated yellow chromed or zinc plated blue passaged.The company can produce 60 million pieces of inserts with various specifications every year, and provide all kinds of auxiliary tools.

Integrity management, scientific and technological innovation, and customers grow together to create brilliant.