Anti Theft 3V Pyroelectric Infrared PIR Sensor Human Body Movement detection

Anti-theft Digital Intelligent Human Body Movement Pyroelectric Infrared Sensor P916 PIR

Description Of The P916 PIR Sensor

The P916 is a pyroelectric infrared sensor that integrates a digital intelligent control circuit and a human body detection sensitive element in an electromagnetic shielding cover. The human body sensing sensor couples the sensed body motion signal to the digital smart integrated circuit chip through a very high impedance differential input circuit. The digital smart integrated circuit converts the signal into a 15-bit ADC digital signal when the PIR signal exceeds the selected digital valve. The value will have a timed REL level output.

Features Of The P916 PIR Sensor

* Digital signal processing
* Enable power regulation for more energy savings
* Two-way differential very high impedance sensor input
* A second-order Butterworth band-pass filter with built-in infrared sensors shields input interference from other frequencies
* High power supply rejection ratio, anti-radio frequency interference
* Sensitivity, timing, light sensor Schmitt REL output
* LED sensor dynamic output port
* Low voltage, low power consumption, instant work after startup

Application Of The P916 PIR Sensor

* toy
* IoT sensor
* Digital Frame
* Sensor light
* TV, fridge, air conditioning
* Web video camera
* USB alarm
* PIR motion detection
* Intrusion detection
* Occupancy detection
* Interior lights, corridors, buildings, private alarms
* LAN Monitor
* Car theft

Performance parameters Of The P916 PIR Sensor

1.Maximum rated value
Any electrical stress exceeding the parameters in the table below may cause permanent damage to the device. Working under these maximum rated conditions may affect the reliability of the device.

2. Working conditions (T=25 °C, V DD = 3V, unless

Output voltage waveform Of The P916 PIR Sensor

Transmission spectrum of window material Of The P916 PIR Sensor

Detection angle Of The P916 PIR Sensor

Size angle bitmap Of The P916 PIR Sensor(mm)

1:VDD(PIR Power Supply) 2:REL(PIR Output) 3:VSS(PIR Power Supply Ground)

Precautions Of The P916 PIR Sensor

●When there are stains on the window, it will affect the detection performance, so please pay attention.

● The lens is made of a weak material (polyethylene). When a load or impact is applied to the lens, malfunction and performance deterioration may occur due to deformation and damage, so avoid the above.

● Failure to apply static electricity of ±200V or more may cause damage. Therefore, please pay attention to the operation, avoid touching the terminal directly by hand.

●When soldering a wire, solder the soldering iron at a temperature of 350 ° C or less and soldering within 3 seconds. When soldering through a solder bath, performance may deteriorate, so avoid it.

● Please avoid cleaning the sensor. Otherwise, the cleaning liquid may intrude into the inside of the lens, which may cause deterioration in performance.

● When using the cable wiring, it is recommended to use shielded wires to minimize the influence of interference.

Dongguan Ampfort Electronics Co., Ltd. is a high-tech enterprise specializing in R&D, manufacturing and sales, committed to becoming a comprehensive supplier of circuit protection components.

We introduced advanced quality system,management systems and high-precision automation equipment from Germany, set up multiple production bases and continue to increase product lines. Our team consist of experienced engineers, passionate business elites, and regularly trained skilled workers, which provides a solid foundation for quality assurance and productivity performance. Moreover, our products have passed safety certifications of many countries and are favored by many consumers by years’ unremitting efforts.

We cooperated with universities and colleges, and will continue to research and develop new products , committed to high-quality circuit protection solutions, and provide global customers with efficient technology, products, and testing support to meet their requirements for rapid development of new products. We are gradually updating from "Made In China" to "Created In China" and to "Intelligent Manufacturing In China", from circuit design to product testing, we will provide you with one-stop service in the field of circuit protection.After years of intensive cultivation, we have maintained a good relationship with our peers and have become distributor of many famous electronic component brands to meet the diverse needs of customers.

The main products include: Thermistors, Varistors, Temperature Sensors, Fuses and corresponding Hardware and Plastic accessories, Inductors, Thermal Protector, Overload/Composite Protectors, Discharge Tubes, Photoresistors and Wiring Harnesses etc. Through the combination of different process devices,Ampfort Electronics can meet customers' individual circuit protection requirements. Our products are widely used in: power adapters, switching power supplies, chargers, transformers, computers, telephones, household appliances, communication products, lighting products, toy products, various instruments and various electronic cables, electrical products, IT, Consumer electronics, automobiles, batteries and other fields.

Choose us, Ampfort will be your loyal and reliable partner for protection circuit products !

Philosophy Survive with integrity and service, and develop with quality and innovation.

Goal Standardization Systemization Internationalization Leading leader in the same industry

Purpose Serve customers and develop enterprises

Benefit the employees and return to the society

Mission Dare to compete, be good at competition, win the competition

Vision Full of ambition today and hope tomorrow will be fruitful.

Message Innovate,forge ahead and hold hands, harvest brilliance and share together.