

Add to Cart
Cat 6 Cable, Cat 6 Network Cable, Cat 6 Ethernet Cable, SFTP Cat 6 Cable Application
This is especially suitable for rail transit on-board PIS systems which should be given priority when it comes to the use of
crossed-linked cables according to national relative standards.
TC's cross-linked, low smoke zero halogen, flame retardant
stranded, shielded cable fully complies with the relevant national
standards.
Product Features
TC's Cat 6, 24 AWG, 4-pair, dual shielded, cross-linked, LSZH,
flame retardant, indoor cable adopts cross spline, copper mesh braid of over 80% density, as well as overall aluminum foil shield, greatly enhancing technical indicators, including Attenuation,
NEXT, and ANEXT, which exceed the parameters specified in GB/T
18015.5 (IEC 61156-5) standards.
Meanwhile, the cable supports Power Over Ethernet (POE/POE+).
Application Standards
TIA/EIA568-C.2
Technical Details
Transmission Performance | Cat.6 | TC | |||||
Frequency (MHz) | 4 | 20 | 62.5 | 100 | 200 | 250 | 350 |
IL Attenuation (dB/100M) | 3.4 | 9.5 | 13.5 | 17.2 | 24.8 | 28 | 31 |
Near End Crosstalk Attenuation (NEXT, dB) | 94 | 92.4 | 90.5 | 87.9 | 78.8 | 74.9 | 62.4 |
NEXT Power and PS NEXT (dB) | 73.9 | 69.9 | 61.7 | 64.3 | 59.6 | 61 | 58.6 |
Equal Level Far-end Crosstalk Attenuation (ACR-F, dB) | 108.9 | 99.2 | 90.7 | 107.2 | 82.8 | 77.2 | 74.6 |
ACR-F Power and PS ACR-F (dB) | 94.4 | 91.2 | 87.9 | 90.5 | 77 | 73.8 | 70.5 |
Return Loss (RL, dB) | 32.8 | 38.6 | 32.8 | 38.6 | 32.5 | 27.8 | 25.3 |
Notes: The values reflected in the table above are typically
measured, in accordance with IEC 61156-9.
Physical Specifications | |
Conductor Size (nominal value) | 4×2× (7*0.2mm) (AWG24) |
Outer Diameter of Cable (nominal value) | 9.0mm |
Weight (305m, with package, nominal value) | 22kg |
Electrical Properties | |
Transverse Conversion Loss (TCL) | ≥ 55dB-20×lgf (100-2000MHz) |
Delay Skew | 45ns/100m |
NVP | 65% |
Power Over Ethernet (POE) | Enhanced Power Over Ethernet under IEEE 802.3at |
Mechanical Properties | |
Minimum Bend Radius (dynamic) | 40mm |
Minimum Bend Radius (static) | 80mm |
Maximum Installation Tension | 100N |
Flammability (LSZH) | |
Flame Resistance (of single wire) | GB/T 18380.12 (IEC 60332-1-2) |
Flame Resistance (of bunched wires) | GB/T 18380.35 (IEC 60332-3-24) |
Smoke Density | GB/T 17651 (IEC 61034-1/-2) |
Hazardous Halogen Gas | GB/T 17650.1/.2 (IEC 60754-1/-2) |