A Grade Elm Wood Veneer Crown Cut Thick 0.50MM For Interior Designs

A Grade Elm Wood Veneer Crown Cut Thick 0.50MM For Interior Designs

• Veneer Cut: Crown Cut

• Grade: Panel A

• Length: ≥245CM

• Width ≥12 CM

• Thickness: 0.50MM

• Thickness Tolerance: +/-0.02MM

• Moisture Content: 8-12%

• Usage: Furniture,Fancy plywood ,Cabinet, Chest, Interior Decoration

TECHNIES SHEET:

Click Below Link to download our Wood veneer catalogue:

LONSON VENEER CATALOGUE.pdf

ABOUT Elm Wood:

Common Name(s): American Elm, Soft Elm, Water Elm

Scientific Name: Ulmus americana

Distribution: Eastern to Midwest United States

Tree Size: 65-100 ft (20-30 m) tall, 2-3 ft (.6-1 m) trunk diameter

Average Dried Weight: 35 lbs/ft3 (560 kg/m3)

Specific Gravity (Basic, 12% MC): .47, .56

Janka Hardness: 830 lbf (3,690 N)

Modulus of Rupture: 11,800 lbf/in2 (81.4 MPa)

Elastic Modulus: 1,340,000 lbf/in2 (9.24 GPa)

Crushing Strength: 5,520 lbf/in2 (38.1 MPa)

Shrinkage: Radial: 4.2%, Tangential: 9.5%, Volumetric: 14.6%, T/R Ratio: 2.3

Color/Appearance: Heartwood is light to medium reddish brown. Paler sapwood is usually well defined.

Grain/Texture: Grain is interlocked (making it very resistant to splitting). With a somewhat coarse, uneven texture.

Endgrain: Ring-porous; large to very large earlywood pores in a continuous row one or two pores wide, small latewood pores in wavy bands; tyloses occasionally present in earlywood; growth rings distinct; parenchyma vasicentric and confluent; medium rays, spacing normal.

Workability: Can be a challenge to work because of interlocked grain, especially on quartersawn surfaces. Planing can cause tearout and/or fuzzy surfaces. Poor dimensional stability. Glues, stains, and finishes well. Responds well to steam bending, and holds nails and screws well.

ABOUT US:

Lonson Veneer Co.Ltd focus on Producing and exporting wood veneers for 9 years. Our veneers include: Natural Wood Veneers, Fumed (smoked) Veneers, Rough Cut (smoked) Veneer, Dyed Veneers, Reconstituted Veneers. All sizes are available, wood flooring veneers, furniture size, door size, Panel size. Grades A; A/B; C; C/D, Monthly capacity 500,000 sqm. Until now, we already exported to Indonesia, Vietnam, Malaysia, India, Pakistan, Bangladesh, UAE, Philippines,Korea, etc more than 20 countries. Clients like our quality wood veneers and always repeat orders. You are welcome to inquire for any demands.

WHY US:

1, Experienced wood veneers manufacturer and exporter for 9+ years.

2, Various kinds wood veneers, including Natural wood veneer, Dying veneer, Fumed veneer, Rough Cut veneer, Recomposed veneer, etc.

3, Different sizes and grades are all available. Wood Flooring veneer, Furniture size, door size, panel size, thickness from 0.4-2mm.

4, Professional and Considerate Service.

5, Fast Delivery and Continuous Supply.

FAQ:

1, Minimum Order Quantity: 1 pallet

2, Delivery date: within 7-30 days after receiving the deposit

3, Payment Terms: 30% T/T as deposit, 70% T/T against copy B/L

4, Samples: Free

5, Samples Making Time: 1-3 days

6, Package: Engineered Wood Pallets

EXPORT PACKAGE:

FACTORY TOUR:

Lonson Veneer Co.,Ltd was established in the year 2012, with more than 9 years in the wood veneers producing, exporting, our wood veneer already widely acceptable by the clients from more than 20 countries, like South Korea, UAE, India, Pakistan, Vietnam, Indonesia, Malaysia, Bangladesh, etc.

Our wood veneers species cover widely, species like white oak, red oak, white ash, American black walnut, cherry, maple, hickory, Burmese teak, ebony, pine, birch, basswood, apple wood, eucalyptus......are all available. Sizes also varies from wood flooring size to furniture size, door size, panel size. Different grades could be obtained accordingly.