Product Details
Disposable Virus Sampling Tube Mouth Swab Structure Composition
Structure Composition
The product consists of cotton swabs and a tube containing a
fresh-keeping solution. The sterilization. The sample tube body is
made of PP, the cap is made of PE, the cotton swab is made of ABS,
and the cotton swab head is made of nylon wool.
Sampling Tube
- The sample tube body is transparent, the surface is smooth and
clean, and the sticker is clean and complete.
- There are no stains, obvious scratches and cracks in the tube. The
thickness of the tube wall is uniform, without obvious bending and
deformation. The cap is well coordinated with the pipe body, and
the screws can be tightened without the phenomenon of skew cap.
Preservation Solution
- The liquid is odorless, tasteless, and has no visible particles or
impurities. There is no turbidity, foam or foaming in the process
of transportation. It is normal to use.
- Standard pH ranges from 7.0 to 8.5.
- The storage capacity
is:1ml,1.5ml,2ml,2.5ml,3ml,3.5ml,4ml,5ml,6ml,7ml,8ml,9ml,10ml,12ml,15ml,20ml,25ml,
Tolerance ±10%
Sampling Swab
- The sample swab should be clean, odorless, tasteless, the sample
hair should be soft, and the surface should be free of yellow
spots, impurities and hair loss.
- When the speed of the clamp of the wave shear and connection
hardness testing machine is 200mm/min, the pulling force on the
sampling rod head and one end of the connecting rod is not less
than 2N.
- When the test width is 6cm (the width must avoid breaking), the
plastic rod must be able to withstand a static pressure of 5N and
last for 15 seconds without permanently deforming or breaking.
- The head of the sampling swab must be fixed at a position of 90°
vertical downward pressure. The wave short force of the sampling
cotton swab must be greater than 2N.
- The tube body filled with the retention liquid should be matched
with the cover. The tube body and the cover should be kept
undamaged and free of leakage of the retention liquid.
- Product identification must be clear, free from damage, and free
from damage.
Swab size Unit: mm
Swab length (L2) | Length of broken head (L1) | Maximum diameter of swab rod (D1) | Minimum diameter of swab rod (D2) | Length of swab head (L3) |
150±5 | Mouth swab | Throat swab | Nasal swab | Mouth swab | Throat swab | Nasal swab | Mouth swab | Throat swab | Nasal swab | 20±3 |
30±5 | 80±5 | 80±5 | 2.5±0.2 | 2.5±0.2 | 2.5±0.2 | 2.0±0.2 | 2.0±0.2 | 1.1±0.2 |
Intended Use
Suitable for collection, storage and transportation of nasal and
oropharyngeal specimens
Applicable Departments
Fever outpatient department, emergency room, laboratory department,
infection control department
Usage Method
- Please wash your hands and open the outer packing of the sample
swab before sampling. Please do not touch the head of the cotton
swab after removing it.
- According to different sampling requirements, use cotton swab to
sample the corresponding parts.
- Immediately after sampling, place the swab in a collection tube
containing the preservation solution to avoid contact with other
components.
- Break the cotton swab, remove the tail, tighten the cap, and
sample.
- After sampling, place the virus sampling tube and store it, and
send it to the inspection department for testing within 1 week.
Matters Needing Attention
- Please make sure that the outer packing of the product is in good
condition. Check the storage line to make sure there are no leaks.
- This product is a disposable product, not allowed to use the second
time.
- Sampling procedures should be considered as potentially dangerous
for infection and should be handled in accordance with relevant
regulations.
- After use, the medical waste must be disposed of in accordance with
the relevant regulations.
Important
- Avoid the upper end of the swab touching the surface of the swab
before sampling.
- Care should be taken when placing a sample swab in your mouth
because of the risk of suffocation.
- After collecting pathogenic bacteria samples, in order to maximize
the retention of pathogenic bacteria, a sampling cotton swab should
be completely inserted into the preservation solution.
- After use, the storage tube and cotton swab should be treated in
accordance with the relevant medical waste treatment methods.
Company profile
Zhongxiu Science And Technology Co.,Ltd., is a high-tech enterprise
engaged in the research and development, production and operation
of in vitro diagnostic products. The in vitro diagnostic products
developed by the company cover POCT series, microbial series,
biochemical series and immune series reagents and supporting
instruments.
The company has always adhered to the core concept of "fast and
accurate, living up to life", committed to providing society with
excellent products and services, and contributing to the cause of
human health.
Company Profile
Zhongxiu Science And Technology Co.,Ltd., founded in 2016, is
located in Dingluan Industrial Zone, Changyuan City, Henan
Province. The company covers an area of about 100 acres and the
initial investment is about 200 million yuan. The company has a
scientific and complete management system, a purification workshop
of national standards, and a fully functional inspection center. On
this basis, the company will continue to invest in research and
development, accumulate technical strength, update manufacturing
equipment, improve production technology, improve inspection
technology, improve product quality, and provide customers with
safe and effective in vitro diagnostic products.
Zhongxiu Science And Technology Co., Ltd. is a high-tech enterprise
engaged in the research and development, production and operation
of in vitro diagnostic products. The in vitro diagnostic products
developed by the company cover POCT series, immune series,
microbial series and other reagents and supporting instruments.
The company has always adhered to the core concept of “fast and
accurate, living up to life”, committed to providing society with
excellent products and services, and contributing to the cause of
human health.