

Add to Cart
Marine Car Boat 6 Positions Way Circuit ATC ATO LED Automotive
Blade Fuse Box Block Fuse Holder with Negative Busbar
Specifications of 6 Way LED Negative Fuse Holder
[Product Name]
Positive and Negative Auto Blade Fuse Holder with LED Indicator [1
Input 6 Output ]
[Net Weight]
176g
[Gross Weight]
183g
[Size]
88*87.75*36.5mm
[Material]
PBT base, PC cover, Nickel-plated copper connection terminal, PPX40
sticker
[Voltage]
32V
[Input Rated Current]
100A
[Output Rated Current]
Each circuit 30A
[Indicator color]
Red
[Main Wire Terminal]
M5 Thread Stud
[Main Wire Gauge]
#4-6
[Single Wire Terminal]
M4 Thread Stud
[Single Wire Gauge]
#12-16
[Indicator Function]
When the red LED light is on, it means the fuse has been
disconnected and it needs to be replaced in time to continue
running
[Application]
Can be installed in cars, villas, RVS, buses, yachts, boats, etc
[Usage]
It can be directly connected to the circuitry of any electrical
appliances used on the vehicle/ship [such as: roof lights,
headlights, view-width lights, fog lights, warning lights, on-board
refrigerators, on-board chargers, on-board fans, on-board
TELEVISIONS, etc.]
[Accessories]
StickerX2; self-tapping screw X4; We also can supply fuse if
needed.
Material | PBT Base+PC Cover |
Product Name | Marine Car Boat 6 Positions Way Circuit ATC ATO LED Automotive Blade Fuse Box Block Fuse Holder with Negative Busbar |
Main Wire | Input terminal rating: M5 thread studs(100A 32V DC.max), intput wire size: #4-6AWG |
Single Wire | Out put terminal rating :30A max per circuit, output wire size:#12-16AWG |
Certificate | ROHS |
Contact Terminal | Nickel Plated Copper |
Operating Voltage | DC 32V |
Rated Current | 30A |
Fit For | Standard Blade Fuse |
Temperature | 30℃-85℃ |
The Application of 6 Way LED Negative Fuse Holder
Each fuse in the fuse box can be connected to any electrical
circuit (such as: car dome light, car headlights, wide light fog
lights, alarm lights, car refrigerator, car charger, car
navigation, etc.), when the current is too high, the fuse will burn
itself out, thus playing a role in protecting the safe operation of
the circuit.
The Details of 6 Way LED Negative Fuse Holder
Fuse Function
When the circuit is faulty or abnormal, the current will continue
to rise, and the rising current may damage some important or
valuable components in the circuit, or burn the circuit or even
cause a fire. The fuse protects the electronic equipment from
overcurrent damage, and can also avoid serious damage caused by the
internal failure of the electronic equipment. Therefore, each fuse
has a rated specification, and the fuse will blow when the current
exceeds the rated specification. If the fuse is correctly installed
in the circuit, the fuse will fuse and cut off the current when the
current abnormally rises to a certain height and temperature,
thereby protecting the safe operation of the circuit.
Product Advantages
[1] The product is made of PBT flame-retardant resistant high and
low temperature environmental protection material, which fully
meets the requirements of [The fuse holder must have good
mechanical strength, insulation, heat resistance and flame
retardancy, and should not be broken, deformed, burned or burned
during use. Short circuit and other phenomena] conditions
[2] All bus bars and fuse clips are nickel-plated copper, which has
corrosion resistance and excellent electrical conductivity
[3] All fasteners are made of stainless steel. The input of the
fuse box and the output end are fixed with tightening screws, which
can be installed more quickly. The fuse box is fixed with
self-tapping screws, which is easier and safer to install.
[4] The product has a red LED indicator design, corresponding to
each electrical appliance connected to the fuse, when the fuse is
disconnected, the red light will be on, you can immediately know
which fuse is broken, and it is convenient to deal with it in time
[5] The product is given a sticker, which can be affixed to the
electrical appliances we are connected to according to the name on
the sticker. When the fuse is broken and the red light is on, we
can immediately distinguish which electrical appliance has the
problem. save time and energy.
[6] The product is delivered with double fuses. When applied, the
fuse is burned out and can be replaced from the spare fuse
immediately, and the fuse has been delivered with multiple Abes.
You can choose the Abe fuse according to the current electrical
appliances.