

Add to Cart
DS18B20 Chip NTC Thermistor Digital Waterproof Temperature Sensor Probe for Aquarium
Description of DS18B20 Chip NTC Temperature Sensor
DS18b20 temperature detector probe adopts the brand-new and original DS18B20 temperature sensor chip.
Each pin of chip is separated by heat shrinking tube to prevent the
short circuit, and sealed inside for waterproof and damp-proof. Its
direct "One line Bus" digital transmission greatly improves the
anti-jamming capability of system, suitable for field temperature
measurement in harsh environments.
At the same time, it is sealed with a high thermal conductivity of
sealing rubber strip, to ensure the temperature sensor’s high
sensitivity, with a very tiny temperature delay. Its measured
temperature range is from -55℃ to +125℃, in the range of -10℃~
+85℃, its accuracy is±0.5℃.
When testing it, need to connect the signal end (yellow line) of
sensor to the Digital port of microcontroller, meanwhile, need to
add a pull-up resistor on the Signal end, or else the test will
fail.
Features of DS18B20 Chip NTC Temperature Sensor
* 3.0V ~ 5.5V power supply
* 9 to 12 adjustable resolution
* Wide temperature range of -55 ℃ ~ +125 ℃
* No external components, a unique single-bus interface
* Red (VCC), yellow (DATA), green (GND)
* Output leads: red (VCC), white (DATA), black (GND)
* Every pin of the chip is sealed and separated by the heat shrink
tube. Good for insulation and to prevent short circuit. 3 output
lines, * * * * * * VCC/DATA/GND. The exterior is made of PVC
plastic tube, which is safe, wear-resistant and waterproof.
* The high quality 304 stainless steel probe, is resistant to high
temperature, fast heat conduction and accurate reading.
* The sensor has one unique number and the temperature acquisition
device identifies the corresponding temperature sensor by number.
* The field temperature is directly transmitted in the digital way
of 1-Wire bus, no need the external components and greatly improves
the system's anti-interference. Suitable for the harsh
environments.
Drawing of Aquarium DS18B20 Chip NTC Thermistor Digital Waterproof Temperature Sensor Probe
Overall Dimension(Unit:mm)
Internal Wiring Diagram(Unit:mm)
Pin 1 Soldering to black GND ;
Pin 2 Soldering to white DQ ;
Pin 3 Soldering to red VDD;
Material Explanation Of Aquarium DS18B20 Chip NTC Thermistor Digital Waterproof Temperature Sensor Probe
NO | Material Name | Item/PN |
2-1. | Chip | Digital sensor chip DS18B20 |
2-2. | Epoxy resin | J105/J106B/J05X G208/GU01 white |
2-3. | Shell | Ф6.0*50 Stainless steel shell |
2-4. | Tube | 1.5 Black double-wall thermal shrinkage tube L=15mm*3 |
2-5. | Lead wire | 3C-FEP(red white black)OD4.3mm black+ Silica gel ecderon +shield |
2-6 | Tube | Φ6.4Black double wall heat-shrinkable tubing L=30mm |
Application Of Aquarium DS18B20 Chip NTC Thermistor Digital Waterproof Temperature Sensor Probe