Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver

Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver

Product Features

●Supports up to 11.3Gb/s bit rates

●Duplex LC connector

●Hot pluggable SFP+ footprint

●850nm VCSEL transmitter, PIN photo-detector

●Up to 300m on 50/125um MMF(2000MHZ.KM)

●Low power consumption, < 1W

●Digital Diagnostic Monitor Interface

●Optical interface compliant to IEEE 802.3ae

●Electrical interface compliant to SFF-8431

●Operating case temperature:

Commerical:0~70°C

Industrial:-40 to 85 °C

Applications

●10G Base-SR/SW at 10.3125G

●10G Fiber Channel

●Other optical links

Product Descriptions

Olinkcom’s OLSP851XL-C(I)DS3 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet over MultiMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-SR/SW. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication and datacom.

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Electrical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Note:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured at 10.3125b/s with PRBS 2^{31 – 1} NRZ test pattern.

2.20%~80%

3.Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 2^{31 - 1} NRZ test pattern for BER < 1x10^-12

Digital Diagnostic Specifications

The OLSP851XL-C(I)DS3 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Notes:

1. Internally measured

2. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

Compatibility
• Cisco 5700 AIR-CT5760-100-K9
• Cisco 5700 AIR-CT5760-250-K9
• Cisco 5700 AIR-CT5760-25-K9
• Cisco 5700 AIR-CT5760-50-K9
• Cisco 5700 AIR-CT5760-HA-K9
• Cisco 6000 NC6-60X10GE-L-S
• Cisco 6000 NC6-60X10GE-M-S
• Cisco 6000 NCS-6008
• Cisco 6500 VS-S2T-10G
• Cisco 6500 VS-S2T-10G-XL
• Cisco 6500 VS-S720-10G-3C
• Cisco 6500 VS-S720-10G-3CXL
• Cisco 6500 WS-X6708-10G-3C
• Cisco 6500 WS-X6708-10G-3CXL
• Cisco 6500 WS-X6716-10G-3C
• Cisco 6500 WS-X6716-10G-3CXL
• Cisco 6800 C6816-X-LE
• Cisco 6800 C6824-X-LE-40G
• Cisco 6800 C6832-X-LE
• Cisco 6800 C6840-X-LE-40G
• Cisco 6800 C6880-X
• Cisco C4KX-NM-8SFP+
• Cisco C6800-16P10G(-XL)
• Cisco C6800-16P10G(-XL)
• Cisco C6800-32P10G(-XL)
• Cisco C6800-32P10G(-XL)
• Cisco C6800-8P10G(-XL)
• Cisco C6800-8P10G(-XL)
• Cisco C6800IA-48FPD
• Cisco C6800IA-48FPDR
• Cisco C6800IA-48TD

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.