1000BASE-LX/LH SFP Optical Transceivers 1310nm 10km DOM LC SMF

1000BASE-LX/LH SFP Optical Transceivers 1310nm 10km DOM LC SMF

1000BASE-LX/LH SFP Compatible Brocade 1310nm 10km DOM LC SMF Transceiver Module

Product Features

● Supports 1.25Gbps/1.0625Gbps bit rates

● Duplex LC connector

● Hot pluggable SFP footprint

● 1310nm FP laser transmitter and PIN photo-detector

● Applicable for 10Km SMF connection

● Low power consumption, < 0.8W

● Digital Diagnostic Monitor Interface

● Compliant with SFP MSA and SFF-8472

● Very low EMI and excellent ESD protection

● Operating case temperature: Commerical:0 to 70 °C Industrial:-40 to 85 °C

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. TD+/- are internally AC coupled with 100Ω differential termination inside the module.

2. Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.

3. RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured at 1.25Gb/s with PRBS 2 2^{23 – 1}NRZ test pattern.

2. Unfiltered, measured with a PRBS2^{23 – 1} test pattern @1.25Gbps

3. Measured at 1.25Gb/s with PRBS 2^{23 – 1} NRZ test pattern for BER < 1x10^-12

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.