10GBase SR SFP+ Optical Module Multi Mode Fiber 850nm 300m DDM

10GBase SR SFP+ Optical Module Multi Mode Fiber 850nm 300m DDM

Intel E10GSFPSR Compatible 10G SFP+ SR Optics Module (MMF, 850nm, 300m, LC, DDM)

The Intel E10GSFPSR compatible optics is high performance and cost effective SFP+ SR transceiver. It supports data-rate of 10.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW) over multi-mode fiber cable. It is programmed to be compatible with a wide range of Intel Switches, Routers, Network Interface Cards (NICs) and Ethernet Media Converters

Product Features

● Compliant to SFP+ Electrical MSA SFF-8431

● Compliant to SFP+ Mechanical MSA SFF-8432

● Multi rate of up to 11.3Gb/s

● 10G Ethernet compliance or SDH/SONET

● Low power consumption

● 0℃ to +70℃ / -40~85℃ case operating temperature range

● Laser Class 1 IEC / CDRH compliant

● RoHS 6/6 compliant

● Compliant with product safety standards

General Operating Characteristics

Optical Characteristics (TOP(C) =0 to 70 ℃,TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured at 10.3125b/s with PRBS 2^{31 – 1} NRZ test pattern.

2. 20%~80%

3. Under the ER worst case=4.5@ 10.3125 Gb/s with PRBS 2^{31 - 1} NRZ test pattern for BER < 1x10^-12

The OLSP851XL-C(I)DS3 is a Class 1 laser product. It fully complies with the multi-sourcing agreement (MSA) which enables it to work in all MSA compliant platforms. OLSP851XL-C(I)DS3 must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.

Related Products

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.