40km 10G SFP+ SMF Bidirectional Optical Transceiver TX1270 / RX1330nm

SFP+, 10Gbps, Bi-Directional, 10GBase-BX, SMF, Tx1270/Rx1330nm, 40KM

Generic 10G SFP+ BIDI TX1270/RX1330nm 40km

This SFP+ transceiver provides 10GBase-BX throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1330nmTx/1270nmRx via an LC connector.This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.

Product Features

• SFF-8432 and SFF-8472 Compliance

• Uncooled DFB transmitter and PIN receiver

• Simplex LC Connector

• Single-mode Fiber

• Hot Pluggable

• Excellent ESD Protection

• Metal with Lower EMI

• RoHS Compliant and Lead Free

Applications

• 10GBase-BX Ethernet

• 8x/10x Fibre Channel

• Access, Metro and Enterprise

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. Into 100Ω differential termination.

3. 20 – 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1’s and four 0’s sequence in the PRBS 9 is an acceptable alternative.

4. LOS is an open collector output. Should be pulled up with 4.7kΩ – 10kΩ on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured with worst ER=6; BER<10^-12; 2^{31 – 1} PRBS.

About Us:

Shenzhen Olinkcom offers a vast range of optical modules from 155Mbps ~ 100Gbps, including SFP, SFP+/XFP, QSFP+, CFP/CFP2/QSFP28/CFP4, SFP28 and CWDM, DWDM solution with the concept of "Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement", Olinkcom keep developing and optimizing product design solution, to provide our valued customers with most cost efficient product and service, as well as some customized products.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.