1800 MoSi2 Heating Elements 30x300mm High Heat Extensibility

1800 MoSi2 Heating Element (30x300mm)

Specification:

• Materials: MoSi2
• Working temperature:
  • 1750°C (3182°F) in air (short time)
  • 1650°C (3002°F) in N2
  • 1170°C ~ 1450°C (2138°F ~ 2642°F) in H2
• Volume Density: 5 ~ 5.6g/cm3
• Bend strength: 15 ~ 25kg/cm3
• Vickers hardness: (HV) 570kg/mm2)
• Porosity rate: 7.4%
• Water absorption: 2%
• Heat extensibility: 4%

Dimension:

D1: Ø12mm
D2: Ø6mm
A: 30mm
L=L1+L2:=180+120=300mm


Installation

When installing heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber. The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.

Warning:

Resistivity Properties of MoSi2 Heating Element

1. The resistivity of MoSi2 heating elements rises with increase in temperature (shown in the graph below). When the temperature of the heating stage is below 300°C, less than 35% of the total output power should be applied to avoid stressing the elements with excessive current.
2. Generally the resistance of heating elements will not be affected by aging under normal operating conditions, therefore old elements can be used together with new ones.

Henan ZG Industrial Products Co. Ltd. was founded by specialists of leading industrial institutes in Zhengzhou city, China in 2007.

Our company manufactures, complex develops, supplies, introduces and upgrades products from technical ceramics, heating elements and graphite. We provide services for the manufacture, repair and renovation of special high-temperature equipment as well. In addition, our company provides services for R&D, analytical research within our specialization.

We have established contacts with the world’s leading and domestic manufacturers of ceramic and heating elements, leading industry institutes and track all the latest trends in this field.

The introduction of ceramic and heating elements in production requires a special study of each case, taking into account technological and market nuances. The specialists of our company have all the necessary experience for the most complete solution of the customer’s problem and developing an optimal offer.

Among our customers are chemical, petrochemical, oil refining, oil and gas, mining, mining and concentrating, paper, metallurgy, power, electrical, electronic, glass and other industries.

We will be glad to answer all your questions.