

Add to Cart
UV-200AT Ozone Concentration Analyzer
UV-200AT benchtop portable ozone concentration analyzer (negative pressure sampling) is mainly used for ozone concentration measurement in the ozone generator pipeline, and can continuously detect the ozone concentration in the ozone generator outlet pipeline online. It is mainly used for continuous detection of ozone gas in various industrial environments, and can also be used to detect ozone gas in operating pipelines, vessels and other environments. It is widely used in pharmaceutical, chemical, municipal and wastewater treatment industries to measure the ozone generator outlet concentration and ozone generator output.
The equipment automatically zero blowing once every certain time to ensure the stability of the zero point, to prevent the zero point drift affect the accuracy of the detection concentration, the gas flow, pressure and flow rate remain unchanged during the calibration zero, to prevent the impact of airflow on the calibration zero, to ensure that the equipment can operate continuously 24 hours a day.
Measurement principle: accurate measurement by photometric
absorption principle based on Lambert-Beer's law.
Test method: dual-optical UV absorption method, high measurement
accuracy.
Light source system: imported long-life UV lamps (wavelength
253.7nm).
Usage: can be installed and used outdoors, the instrument is
waterproof, dustproof, and can run continuously for 24 hours,
equipped with waterproof power supply and signal connector.
Light cell system: foreign separated light cell technology, no
leakage, high pressure resistance, resistance to high flow sampling
gas impact.
Intelligent compensation: built-in light source automatic
compensation function.
Automatic zero calibration: every certain time the device
automatically zero calibration 1 time, you can choose the manual
automatic mode to ensure the accuracy of the detection
concentration.
Data display: high-definition digital backlight display, clear and
countable data.
Output function: 4-20mA current signal, RS485 communication.
Range | 0-200g/m3NTP (optional range: 0-100g/m3, 0-200g/m3, 0-250g/m3) |
Display resolution | 0.01 g/m3 |
Gas flow | 0.8L±0.2L/min |
Input pressure | <0.1 MPa |
Zero point drift | <±0.3%.FS (MAX: ±0.6g/m3) |
Sampling port pipe diameter | Φ6 (6mm*4mm) |
Error rate | ±0.5% |
Communication mode | RS-485 |
Output mode | 4-20mA, linear |
Size | 260mm (L) × 120mm (W) × 230mm (D) |
Tag: Exhaust ozone detector, Ozone detector, Ozone concentration online monitor, Ozone generator manufacturer, Tabletop ozone analyzer,Wall-mounted Ozone Gas Analyzer, OEM/ODM services