mPower POLI MP400 Series 4 In 1 Multi-Gas Detectors
OVERVIEW
The POLI multi-gas detectors (MP400/MP400P/MP400S/MP400H) offer 4-
or 5-gas monitoring of oxygen (O2), combustibles (LEL), numerous
toxic gas options, carbon dioxide (CO2), and volatile organic
compounds (VOCs). The MP400 is a basic 4-gas model with diffusion
sampling, often configured with O2, LEL, carbon monoxide (CO) and
Hydrogen Sulfide (H2S) for confined space entry compliance. The
MP400P has pumped sampling and offers a full range of over 30
sensor options, including electrochemical (EC), pellistor,
non-dispersive infrared (NDIR) and photo-ionization detector (PID).
With 4 sensor slots the use of combination sensors allows up to 6
gases to be measured. The MP400S and MP400H are used in wireless
communication systems for real-time monitoring of gas readings and
alarm status, including man-down alarm, from remote locations for
better visibility and faster response. One MP400H head monitor
communicates with up to 7 MP400S Soldiers. Contact us for larger
wireless systems with up to 32 monitors.
FEATURES
* Available in diffusion or pump version
* Over 30 interchangeable sensor options, including PID for VOC,
NDIR and catalytic for combustibles, and NDIR for CO2
* 4 Sensor slots for up to 6 gas measurements using combination
sensors
* Real-time gas concentration readings
* Alarm status including Low, High, TWA, STEL and Man-Down alarms
* 6 Months continuous datalogging
* 16-Hour rechargeable Li-ion battery (diffusion version)
* IP-65/67 water and dust resistant case
* 360-Degree LED alarm bar; Flip screen
* Large graphical display icon-driven user interface through
intuitive, simple-to-operate two-button user interface
* Easy access to pump, sensor, filter and battery
* Smart Sensors store calibration data, so they can be swapped in
the field
* USB Micro charger & communications cable
* Optional POLI MonoDock station for automated bump test and
calibration
* Wireless real-time remote team communication available (up to 32
monitors)
APPLICATION SCENES
* Oil and gas
* Fire ground “Toxic Twins” detection
* Environmental * Chemical * Pharmaceutical
* Telecommunications
* Multi-gas leak detection in industries such as chemical, food and
beverage, oil and gas (downstream)
PRODUCT PARAMTER
Size | 5.74 x 3.31 x 1.65 in (140 x 84 x 42 mm) |
Weight | 14 oz (400 g) |
Sensor | Over 30 interchangeable and field-replaceable sensors including PID
for VOCs, EC for Toxic and O2, Pellistor for LEL, and NDIR for LEL and CO2 |
Battery | Rechargeable Li-ion pack:16 hours in diffusion with no wireless, 14
hours in diffusion with wireless, 12 hours in pump with no wireless, and 10 hours in pump with wireless |
Direct Readout | Real-time reading of gas concentration, PID measurement gas and
correction factor, Man Down Alarm on/ off, individual compliance indicator, battery status, datalogging on/off, wireless on/off and
reception quality STEL, TWA, peak and minimum values |
Display | 128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED
backlight for enhanced display readability. Automatic screen “flip” feature. |
Keypad | 2 operation keys |
Sampling | Bulit-in pump or diffusion |
Calibration | Manual or automatic bump test and calibration with CaliCase
(separate orders) |
Alarm | Wireless remote alarm notification, audible (90dB@750px),
vibration, visual (flashing bright red LEDs), and on-screen
indication of alarm conditions Man Down Alarm with pre-alarm and real-time
remote wireless notification |
Datalogging | Continuous datalogging (6 months for 4 sensors at 1 minute
intervals, 24 hours a day and 7 days a week) |
Charging and Communication | Charging, data download, instrument setup and firmware upgrades on
PC or laptop via PC comm, cradle, travel charger, or CaliCase Wireless data and alarm status transmission via built-in RF modem
(optional) |
Temperature | -4° to 122°F (-20°C to 50°C) |
Humidity | 0% to 95% relative humidity (non-condensing) |
IP Rating | IP-65 (pump); IP-67 (diffusion) |
Safety Certifications | UL/cUL: Class I, Div 1, Group A, B, C, D |
T4, -20°C ≤ Tamb ≤ +50°C (pending) |
EMC/RFI |
EMC directive: 2004/108/EC |
Warranty | 2-year including most sensors |