Zetron H2S 4 Electrode Hydrogen Sulfide Gas Sensor H2S-B4
Brand Name:Alphasense
Certification:CE
Model Number:H2S-B4
Minimum Order Quantity:1
Payment Terms:L/C, D/A, D/P, T/T
Place of Origin:UK
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing China
Address:
Room 20E, Block 1-A, Oriental Ginza, No. 48 Dongzhimenwai Avenue, Dongcheng,100007, Beijing, China
Supplier`s last login times:
within 33 hours
Product Details
Company Profile
Product Details
H2S-B4 Hydrogen Sulfide Sensor (H2S Sensor) Description
Alphasense Hydrogen Sulfide gas sensors operate using well-known
fuel cell technology.
Sensors are available in the following sizes:
A: 20mm diameter, the industry standard size for portable gas
detectors
B: 32mm diameter package, the best choice for fixed site applications
D: miniature, with proven long-term performance. Sensors for the
next generation of portable gas detectors
With very high sensitivity and low zero, accurate and stable
readings are possible when measuring current concentration ranges
from ppb to 1% H2S.
| H2S-B4 Hydrogen Sulfide Sensor (H2S Sensor) PERFORMANCE | ||
| Sensitivity | nA/ppm at 2ppm H2S | 1450 to 2150 |
| Response time | t90 (s) from zero to 2ppm H2S | < 55 |
| Zero current | nA in zero air at 20℃ | -250 to 200 |
| Noise* | ±2 standard deviations (ppb equivalent) | 1 |
| Range | ppm H2S limit of performance warranty | 100 |
| Linearity | ppb error at full scale, linear at zero and 40ppm H2S | < ±4 |
| Overgas limit | maximum ppm for stable response to gas pulse | 200 |
| * Tested with Alphasense ISB low noise circuit | ||
| H2S-B4 Hydrogen Sulfide Sensor (H2S Sensor) LIFETIME | ||
| Zero drift | ppb equivalent change/year in lab air | < ±100 |
| Sensitivity | drift % change/year in lab air, monthly test | < 20 |
| Operating life | months until 50% original signal (24 month warranted) | > 24 |
| H2S-B4 Hydrogen Sulfide Sensor (H2S Sensor) ENVIRONMENTAL | ||
| Sensitivity @ -20℃ | (% output @ -20°C/output @ 20℃) @ 2ppm H2S | 77 to 90 |
| Sensitivity @ 50℃ | (% output @ 50°C/output @ 20℃) @ 2ppm H2S | 100 to 110 |
| Zero @ -20℃ | nA change from 20℃ | 50 to 60 |
| Zero @ 50℃ | nA change from 20℃ | -120 to -160 |
| H2S-B4 Hydrogen Sulfide Sensor (H2S Sensor) CROSS SENSITIVITY | ||
| NO2 sensitivity | % measured gas @ 5ppm NO2 | < -10 |
| Cl2 sensitivity | % measured gas @ 5ppm Cl2 | < -12 |
| NO sensitivity | % measured gas @ 5ppm NO | < 12 |
| SO2 sensitivity | % measured gas @ 5ppm SO2 | < 20 |
| CO sensitivity | % measured gas @ 5ppm CO | < 3 |
| H2 sensitivity | % measured gas @ 100ppm H2 | < 0.5 |
| C2H4 sensitivity | % measured gas @ 100ppm C2H4 | < 0.1 |
| NH3 sensitivity | % measured gas @ 20ppm NH3 | < 0.1 |
| CO2 sensitivity | % measured gas @ 5% CO2 | < 0.1 |
| H2S-B4 Hydrogen Sulfide Sensor (H2S Sensor) KEY SPECIFICATIONS | ||
| Temperature range | ℃ | -30 to 50 |
| Pressure range | kPa | 80 to 120 |
| Humidity range | % rh | 15 to 90 |
| Storage period | months @ 3 to 20℃ (stored in sealed pot) | 6 |
| Load resistor | Ω (ISB circuit is recommended) | 33 to 100 |
| Weight | g | < 13 |
Matched Transmitter board for H2S-B4 H2S Sensor
Individual Sensor Board (ISB) Alphasense B4 4-Electrode Gas Sensors
The Individual Sensor Board (ISB) is designed for use with the Alphasense B4 family of four-electrode gas sensors. This potentiostat provides a dual channel voltage output.
A low noise bandgap provides the bias voltage for NO sensors and the ISB can measure both oxidising (CO, H2S, SO2 and NO) and reducing (O3 and NO2) gases.
The ISB is configured for specific sensors: NO, NO2, O3 and CO / H2S / SO2 .
Designed for low power applications, the ISB requires 3.5 to 6.4 stable DC supply at only 1mA.
Zetron H2S 4 Electrode Hydrogen Sulfide Gas Sensor H2S-B4
Inquiry Cart
0