

Add to Cart
EDFA 1U Rack or Card type Erbium doped fiber amplifier board
Function | Description | |
Working wavelength range | Standard type: 1529nm~1561nm Extended type: 1528nm~1568nm | |
EDFA type | OBA Power Amplification | OPA Power Amplification |
Min input optical power | -22dBm | -32dBm |
Max output optical power | +20dBm | +16dBm |
Max gain | 17dB | 20dB |
Noise Figure | <5.5dB | |
Gain flatness | <1.5dB | |
Proprietary technology | Support gain locking, gain adjustable, transient control technology, output optical power automatic shutdown | |
Network management function | Support real-time monitoring of EDFA working status, including: optical power, pumping, temperature, etc. Support pump shutdown threshold and automatic recovery time setting function | |
Number of occupied slots | Support OSP3800 full series chassis, occupying 1 slot, (0.5U) | |
Optical interface | LC/UPC | |
Max power consumption | 15W | |
MTBF | >100,000 hours |
Product Features
(1) support C-band DWDM system optical amplification
(2) support optional OSC signal input amplification function
(3) support power amplification, line amplification (secondary optical amplification), pre-amplification
(4) support IP-based graphical SNMP network management, network management methods CLI, Web
(5) can monitor: pump drive current, pump output power, pump switch, pump temperature, input optical power, output optical power, module temperature
(6) support configurable pump switch, AGC mode and APC mode (adjustable input and output optical power)
(7) support optical monitoring port (MON).
Interface definition
Interface | Item | Function/Description |
In | EDFA input interface | Small signal optical power input port |
Out | EDFA output interface | EDFA Amplification output optical port. |
OSC_IN | Monitoring channel input port | Link to the network management card SFP TX to transmit network management information. |
OSC_Out | Monitoring channel output port | Link to the network management card SFP RX to transmit network management information. |
MON | monitoring port | EDFA performance monitoring interface, link OPM or spectrometer. |
Indicator description
Interface | Item | Description |
PWR | EDFA power indicator | On, EDFA power supply is normal; off, power supply failure. |
RUN | EDFA operation indicator | On, EDFA is operating normally; off, the operation is faulty. |
In | EDFA input alarm indicator | On, the input is abnormal; off, the input is normal. |
Out | EDFA output alarm indicator | On, the output is abnormal; off, the output is normal. |
Tem | EDFA module temperature alarm indicator | On, the temperature of the EDFA module is abnormal; off, the temperature of the module is normal. |
Ptem | Pump temperature alarm indicator | On, the pump temperature is abnormal; off, the pump temperature is normal. |
Pump | Pump warning indicator | On, the pump is off; off, the pump is on. |
Pam | Pump current alarm indicator | On, the pump current is abnormal; off: the pump current is normal. |
Introduction