

Add to Cart
EtherCAT Protocol PAL I/O System EtherCAT distributed scalable coupler
3 RJ45 16DI+16DO I/O Module
Product Features of PAL I/O System
Specification of EtherCAT extensible coupler
Model Model | OM52xE Distributed scalable coupler |
Technical Specifications | |
Operating Voltage | 24VDC (18VDC~28VDC) |
Operating Current Consumption | Different product models vary, please refer to the product manual for details. |
Power Protection | Anti-reverse connection protection, surge absorption |
Bus Communication interface | 2*RJ45 |
Expansion Module interface | 1*RJ45 |
Power Terminal Type | Plug-in connectors, screw terminals |
Signal Terminal Type | Plug-in connector, direct plug-in PUSH-IN connection port,or MIL horn socket |
Display Instructions | Power indicator light, NET green indicator light, SF red indicator light,IO signal green indicator light |
Support Protocol | EtherCAT |
Master-Slave Category | Independent slave device |
Ontology IO Point | Yes, see ordering data for details |
Overcurrent Protection Threshold | 1.5A,5ms |
IO response Time | Minimum 500us |
Expansion Capabilities | 16 EM500E-EM modules |
Extended Connection Distance | The total length is 150 meters, and the length between modules is limited to 20 meters. |
Cable Length (shielded) | Maximum 500m |
Cable Length (Unshielded) | The longest input point is 300m, the longest output point is 150m |
Slave Settings | |
Address Settings | Configured by DIP switch or master station |
Maximum Number of Stations per Segment | 255 (The specific number of supported stations is determined by the main station) |
Working Environment | |
Working Temperature | -20~60℃ |
Working Humidity | 5%~90% (no condensing) |
Altitude Altitude | Below 2000 meters (80kPa) Below 2000 meters (80kPa) |
Protection level | IP20 |
Dimensions (L*W*H) | 27mm*104mm*114mm |
Packing
Ordering Details
Specification | Product No. |
OM523E vertical internal bus distributed expandable coupler, EtherCAT bus, 3 RJ45 ports, WellAUBUS backplane bus (black RJ45 port network cable cascade, Category 5e network cable module length( limited to 20 meters), total extension cable total (limited to 150 meters), can be expanded to 16 modules, 24VDC power supply, with 8-digit dial code to set the station ID address, the body comes with 16DI (common cathode/common anode input), 16DO (NPN output), IP20 protection level,support DN35 rail installation | OM523E-1NL22-ECT |
OM523E vertical internal bus distributed expandable coupler, EtherCAT bus, 2 RJ45 ports, WellAUBUS backplane bus (black RJ45 port network cable cascade, Category 5e network cable module length ( limited to 20 meters), total extension cable total (limited to 150 meters), can be expanded to 16 modules, 24VDC power supply, with 8-digit dial code to set the station ID address, the body comes with 16DI (common cathode/common anode input), 16DO (NPN output), supports DN35 installation,MIL horn socket | OM523E-1NL22-ECT-MIL |
OM523E vertical internal bus distributed expandable coupler, EtherCAT bus, 3 RJ45 ports, WellAUBUS backplane bus (black RJ45 port network cable cascade, Category 5e network cable module length ( limited to 20 meters), total extension cable total (limited to 150 meters), can be expanded to 16 modules, 24VDC power supply, with 8-digit code to set the station ID address, the body comes with 16DI (common cathode/common anode input), 16DO (PNP output), IP20 protection level, Support DN35 rail installation | ON523E-1BL22-ECT |
OM524E vertical internal bus distributed expandable coupler, EtherCAT bus, 3 RJ45 ports, WellAUBUS backplane bus (black RJ45 port network cable cascade, Category 5e network cable module length ( limited to 20 meters), total extension cable (limited to 150 meters), can be expanded to 16 modules, 24VDC power supply, with 8-digit dial code to set the station ID address, the body comes with 16DI (common cathode/common anode input), 16DIO (NPN input/NPN output configurable,2-channel configuration), IP20 protection level, supports DN35 rail installation | OM524E-2NL22-ECT |
FAQ:
1.Are you a manufacturer?
Yes, we have our production line and R&D team.
Please visit us via below VR link to see our office and production
area.
https://www.ecer.com/corp/uuu5b8d-industrialnetworkswitch/vr.html
2. What is the leadtime if I order?
After receiving the payment, we start production.
If you are ordering some popular models, we usually got stock.
After some testings, we will ship the materials.
If we do not have stock, production time is usually 3~5 working
days for less than 50pcs/pairs.
3. How will you ship my order?
We will send the goods by air(DHL, UPS or FEDEX) or by sea(for bulk
order)
It is fine to ship purchased items via customer’s shipping account
or forwarder.
It takes 3~5 calendar days to arrive at local customs for
clearance.
4. What is MoQ?
1 Pc/Pair.
For many models, we have stock, it is easy to send samples for your
testing.
5. Can I have a discount?
Yes and it is usually based on quantity and after sample testing.