Managed 16 Port Gigabit Poe Switch Din-rail Network Switch 8RJ45+8SFP With 4*RS485+2*CAN BUS
Brand Name:Olycom
Certification:CE RoHS FCC ISO9001
Model Number:IM-FP888GW-2C4D
Minimum Order Quantity:1 pc
Delivery Time:3~5 working days
Payment Terms:T/T, PayPal
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Managed 16 Port Gigabit Poe Switch Din-rail Network Switch
8RJ45+8SFP With 4*RS485+2*CAN BUS
Key Features of managed 16 port poe switch
- Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
- IEEE 802.3af/at power on to 1 ~ 8 RJ45 ports
- 8 x 10/100/1000Mbps Auto-sensing RJ45 ports
- 8 x 1000Mbps SFP fiber port
- 2 x CAN Bus and 4 x RS485
- 1 x Console port, L2+ managed
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- A store-and-forward switching mechanism
- Operating environment temperature:-40 ° ~75 ° c
Specificaiton of din-rail network switch
| Product Name | 10/100/1000Mbps Managed Industrial POE Fiber Switch with CAN Bus and RS485 |
| Model No. | IM-FP888GW-2C4D |
| Port | 8 x 1000Mpbs SFP port SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km; 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) 2 x CAN Bus (Standard frame 11-bit ID, extended frame 29-bit ID, Support J1939, CANopen, DeviceNet and other protocols (firmware configuration required) 4 x RS485 (support TCP/UDP protocol) 1 x Console port (RJ45, Baud rate: 115200) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching Features | Transmission mode:storage and forward System bandwidth:58Gbps (non-traffic jam) DRAM size: 128M Flash size: 16M Packet buffer size: 4Mb |
Protocol | IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) IEEE 802.3z (1000Base-X ) IEEE 802.3af 15.4W(POE) IEEE 802.3at 30W(POE+) IEEE 802.1D (STP) IEEE 802.1w (RSTP) IEEE 802.1s (MSTP) ITU-T G.8032 ERPS Ring IEEE 802.1Q( VLAN) IEEE 802.3x (Flow control) IEEE 802.3ad (LACP) IEEE 802.1p (QoS) IEEE 802.1ab(LLDP) IEEE 802.1az(EEE) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 |
| L2+ Managed | Supports IEEE802.1q VLAN, port VLAN, based Mac VLAN, IP subnet VLAN, protocol VLAN, VLAN conversion MVR. Supports IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimizes power consumption. Supports STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring (EPR). Supports QoS, transmission classification QoS, CoS, bandwidth control (input/output direction), storm suppression, differential services. Supports dynamic IEEE 802.3ad LACP link aggregation, static link aggregation. Supports IGMP/MLD detection V1/V2/V3, IGMP filtering/adjustment, IGMP query. Supports IGMP proxy report, MLD detection. Security: based on port and Mac IEEE802.1X, RADIUS, ACL. Support IEEE802.3az EEE (Energy Efficient Ethernet) TACACS+, HTTP/HTTPS, SSL/SSH v2. Support Cisco® like CLI, Web network management, SNMP v1/v2c/v3, Telnet. Support software upgrade via TFTP and HTTP, firmware redundancy to prevent upgrade failure. Support RMON, MIB II, mirroring, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP. Support IPV6, ICMP v6NTP/SNTP, TFTP, QOS, ACL. Support SerialCRT,CLI,Telnet,SNMP,HTTP,SSH/SSL |
| Power Supply | POE power supply input voltage: 48V (max 52V), Single PoE power supply output power: 30W (port 1~8) (802.3bt standards required special instructions) |
| CAN Bus | Standards: ISO 11898-2 (high-speed CAN) Communication rate: 10Kbps~1Mbps (configurable) Maximum number of nodes: 110 (default terminal resistance matching) Terminal resistance: 120Ω (optional terminal resistance built-in for each CAN) Isolation protection: Supports 2500V DC isolation (optional) Communication protocol: Supports CAN 2.0A/B, CAN FD Bus voltage range: -3V ~ +32V (anti-surge protection) |
| RS485 | Standards: TIA/EIA-485-A Working mode: Full-duplex or half-duplex (configurable) Communication rate: 115200bps (configurable) Maximum number of nodes: 32 (default) or expandable to 256 (repeater required) Isolation protection: Supports 1500V DC isolation (optional) Bus voltage range: -7V ~ +12V (surge protection) |
| RS485/CAN Stability | Continuous 72-hour full-load communication test under extreme temperature, communication bit error rate ≤1e-9 |
| LEDs | Power, network, fiber, system |
| Environment | Working Temp:-40°～ 75°C ; Storage Temp:-40°～ 85°C;Working humidity:10%～90%, non-condensing; Storage humidity:10%～95%, non-condensing |
| Safety | CE-EMC: EN 55032:2015+AC:2016+A1:2020+A11:2020 EN 55035:2017+A11:2020/EN IEC 61000-3-2:2019/A1:2021 EN 61000-3-3:2013/A2:2021/AC:2022 CE-LVD: EN IEC 62368-1:2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B (Class B) ANSI C63.4:2014 |
| Mechanical information | Shell:Corrugated metal shell; Safety class:IP40; Dimension:158 x 114.8 x 60mm; Mounting method:Din-rail mounting |
Accessories
| Industrial SFP Transceiver | |
| OSPL1E06D-85 | 100BASE-FX (850nm) |
| OSPL1E06D | 100BASE-FX |
| OSPL1E20D | 100BASE-LX |
| OSPL1E40D | 100BASE-EX |
| OSBL1E20D-35 | 100BASE-BX-U (TX 1310 RX1550) |
| OSBL1E20D-53 | 100BASE-BX-D (TX 1550 RX1310) |
| OSPL1G05D | 1000BASE-SX |
| OSPL1G06D | 1000BASE-SX (1310nm) |
| OSPL1G20D | 1000BASE-LX |
| OSPL1G40D | 1000BASE-EX |
| OSBL1G20D-35 | 1000BASE-BX-U (TX 1310 RX1550) |
| OSBL1G20D-53 | 1000BASE-BX-D (TX 1550 RX1310) |
| Industrial Power Adapter Din-rail | |
| IM-DAC220/DC48V2.5A | AC220V to DC48V2.5A, -40～80℃ |
| IM-DAC220/DC48V5A | AC220V to DC48V5A, -40～80℃ |
| IM-DAC220/DC48V10A | AC220V to DC48V10A, -40～80℃ |
FAQ
1.Are you a manufacturer?
Yes, we have our production line and R&D team.
Please visit us via below VR link to see our office and production
area.
https://www.ecer.com/corp/uuu5b8d-industrialnetworkswitch/vr.html
2.What is the leadtime if I order?
After receiving the payment, we start production.
If you are ordering some popular models, we usually got stock.
After some testings, we will ship the materials.
If we do not have stock, production time is usually 3~5 working
days for less than 50pcs/pairs.
3. How will you ship my order?
We will send the goods by air(DHL, UPS or FEDEX) or by sea(for bulk
order)
It is fine to ship purchased items via customer’s shipping account
or forwarder.
It takes 3~5 calendar days to arrive at local customs for
clearance.
4. What is MoQ?
1 Pc/Pair.
For many models, we have stock, it is easy to send samples for your
testing.
5. Can I have a discount?
Yes and it is usually based on quantity and after sample testing.
Managed 16 Port Gigabit Poe Switch Din-rail Network Switch 8RJ45+8SFP With 4*RS485+2*CAN BUS
Inquiry Cart
0