52mm Center Industrial Suspension Air Springs Goodyear 2B8-150/153/550 Contitech FD 120-17 509 For Large Dry Machines

52mm Center Goodyear 2B8-150/153/550 Contitech FD 120-17 509 Indsutrial Suspension Air Springs For Large Dry Machines

Cross Reference

Air Spring spcifications and data parameters: 2B8X2

Air inlet: M12 x 1.5, Centered

Blind nuts on top plate: 2pcs x M8 x1.25

The distance between two blind nuts on top plate: 52mm

Blind nuts on bottom plate: 2pcs x M8x 1.25

Screw center distance on bottom plate: 52mm

Top cover plate diameter: 135mm

Bottom cover plate diameter: 135mm

Height:177mm

Rubber bellow diameter: 189mm

Girdle hoop: 1 piece

Rubber bumper: Without

Convolutions: Double

HS Code: 8708809000

Type: Suspension air spring

Applications: Large Dry Machines

Sample: Available

Suspension air springs can be used in large drying machines

Air springs can be used in large drying machines such as milk dryers. Air springs are often used in heavy-duty applications to provide cushioning and vibration isolation. In the case of milk dryers or other large drying machines, air springs can help to absorb the vibrations produced by the machine during operation. This can help to reduce wear and tear on the machine as well as improve the overall efficiency and effectiveness of the drying process. Additionally, air springs can be adjusted to provide varying levels of stiffness or damping, which can be useful for optimizing the performance of the machine under different operating conditions.

After the rubber air spring has been used for about a period of time, because the rubber is exposed to the air, subjected to ozone, sun, rain, and the corrosion of the capsule by acid, alkali, paint and other organic solvents during the maintenance process, the rubber on the outer layer of the capsule will be damaged. There will be uniform and fine cracks on the surface, that is, cracks. Surface cracks are generally limited to the outer layer of rubber, and the inner sealing rubber layer will not be damaged. However, there are also a small number of capsules with uneven local cord density during the manufacturing process. The capsule with low density will produce larger radial cracks after a certain fatigue, and the cracks will extend to the middle cord layer. Field statistics show that generally when the surface crack length of the capsule exceeds 30mm and the width is greater than 1mm, or cracks When dense pinhole-like shedding occurs, the crack has extended to the outermost cord of the cord layer.

The reated picture of suspension air springs

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd.

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.