High Surface Density Dunlop (FR) 9''1/4x1 S09101 Air Spring Shocks M8 Bolts
Brand Name:AIRSUSTECH
Certification:ISO/TS16949:2009
Model Number:1B200-10
Minimum Order Quantity:5
Delivery Time:5-8 Working Days
Payment Terms:T/T, Western Union, Paypal or Others
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
No. 1, Keyuan Road, Baiyun District, Guangzhou,Guangdong,,China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
High Surface Density Dunlop(FR) 9''1/4x1 S09101 Air Spring Shocks M8 Bolts
Product Details
| Bottom Plate Alignment: Parallel Bottom Plate Center To Center Diameter: 89 mm Bottom Plate Diameter: 161 mm Bottom Plate Hole Quantity: 2 Bottom Plate Type: Steel |
| Top Plate Alignment: Parallel Top Plate Center To Center Diameter: 89 mm Top Plate Diameter: 161 mm Top Plate Hole Quantity: 2 Top Plate Type: Steel |
| Bellow Maximum Diameter: 250 mm Expanded Height: 140 mm Compressed Height: 51 mm Spring Type: Single Convoluted Nut/Blind Nuts Type: 2×M8 |
| Air Inlet: G1/4 |
Part Number
Dunlop(FR): 9'' 1/4x1 S09101, 9' 1/4x1 S09101, 9 1/4x1 S09101
Contitech: FS 200-10, FS 20010, FS 200 10, FS200-10, FS20010, FS200
10
Firestone: W01-M58-6374, W01 M58 6374, W01M586374, WO1-M58-6374,
WO1 M58 6374, WO1M586374
Phoenix: SP 1B 12, SP1B12
Bosch: 822419004
Festo: EB-250-85
Norgren: PM/31091(81/4x1), PM31091(81/4x1), PM 31091(81/4x1)
Dunlop Other Types of Air Suspensions
| SP2906 | SP2907 | SP2910 |
| SP2334 | SP2441 | SP2895 |
| SP2913 | SP2917 | SP2923 |
| SP1536 | SP1482 | SP2861 |
| SP1537 | SP1490 | SP2863 |
| SP2523 | SP1538 | SP1539 |
| SP1540 | SP1541 | SP1542 |
| SP1543 | SP2782NB | SP1558 |
| SP1556 | SP2141 | |
| SP1557 | ||
| SP1408 | ||
| SP2342 |
Assembly Method of Air Spring
(1) The insertion of lumbar ring
The air spring is pressed inward by hand, and the ring is inserted
in turn. After the ring is inserted into the fixed position, the
air spring under pressure is pulled out to restore its original
state. When there are 4 or more flaps, rings can be mounted from
both sides according to this method.
(2) the installation method of upper and lower plates
The upper and lower plates and the air spring are gently inserted,
and after height restriction, compressed air is gradually sent in
to improve the internal pressure. The upper and lower plates can be
automatically inserted with the air spring to achieve sufficient
airtightness. If internal pressure is applied at unrestricted
height, the upper and lower plates will collapse out. Therefore, it
is important to pressurize the upper and lower plates in a device
of sufficient strength to limit height. Air spring and upper and
lower plate sealing parts, such as foreign bodies, rust, oil and
other phenomena, should be cleaned up before operation. In
addition, the rubber and the upper and lower board of the joint
part of some soap and water, will be more easy to chimeric.
1B200-10 Detailed Pictures
High Surface Density Dunlop (FR) 9''1/4x1 S09101 Air Spring Shocks M8 Bolts
Inquiry Cart
0