

Add to Cart
(2) Support ONU auto-discovery/Link detection/remote upgrade of software
(3) Support Route PPPoE/DHCP/Static IP and Bridge mode
(4) Support IPv4/IPv6 dual mode
(5) Support Firewall function and IGMP multicast feature
(6) Support LAN IP and DHCP Server configuration
Technical Specification
Technical item | Details |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector |
Chip Spec | RTL9601D ,CPU 300MHz,DDR2 32MB |
Flash | SPI Nor Flash 16MB |
LAN Interface | 1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector |
LED | 4 LED, For Status of PWR,LOS,PON,LINK/ACT |
Push-Button | 2,For Function of Power on/off,Reset |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) | |
Power Supply | DC 12V/0.5A |
Power Consumption | <3W |
Dimension | 120mmx78mmx30mm(L×W×H) |
Net Weight | 0.08Kg |
Working Environment
Pilot | Status | Description | ||
PWR | On | The device is powered up. | ||
Off | The device is powered down. | |||
PON | On | The device has registered to the PON system. | ||
Blink | The device is registering the PON system. | |||
Off | The device registration is incorrect. | |||
LOS | Blink | The device doses not receive optical signals. | ||
Off | The device has received optical signal. | |||
LINK/ACT | On | Port is connected properly (LINK). | ||
Blink | Port is sending or/and receiving data (ACT). | |||
Off | Port connection exception or not connected. |
FAQ