China Categories

Home Products Suppliers Selling leads

English

Home /Products /Consumer Electronic /Computer Hardware & Software /Routers /

HiOSO GPON OLT SFP Class C+++ SFP OLT Transceiver with SC PC Connector

Brand Name:HiOSO

Certification:CCC,Rohs, CE

Model Number:C+++

Minimum Order Quantity:1000 PCS

Delivery Time:5-10working days

Payment Terms:T/T, Western Union, MoneyGram, D/P

Contact Now

Add to Cart

HiOSO Technology Co., Ltd.

Site Member

Location: Shenzhen China

Address: 4th Flr,10th Bldg,Nangang Second Industrial Park,Songbai Road,Xili Street,Nanshan Dist,Shenzhen.

Supplier`s last login times: within 26 hours

View Contact Details

Product Details Company Profile

Product Details

GPON Class C+++ SFP OLT Transceiver

1. Features

Name: HiOSO GPON OLT SFP Class C SFP OLT Transceiver with SC PC Connector
Brand: HiOSO
Price: 1 USD

l SFP with SC/PC Connector Transceiver

l 1490 nm DFB Tx with isolator

l 1310 nm APD Rx

l Digital diagnostics SFF-8472 Compliant

l 2488 Mbps continuous mode Transmission

l 1244 Mbps Burst mode receiver Data Rate

l RX Fast Burst Mode Detection

l Provide fast RSSI function

l Operation case temperature: 0~70°C or -40~85°C

l Class C+++ link budget

l Comply with ITU-T G984.2 Amendment 1

l Complies with RoHS directive (2002/95/EC)

2. Application

l GPON OLT Class C+++

l FTTx

3. Function Diagram

4. Recommended Operating Conditions

Parameter	Symbol	Min.	Max.	Unit	Notes
Storage Temperature	TSTG	-40	85	°C
Operating Case Temperature	T_C	0	70	°C	ZP5432043-QCS
Operating Case Temperature	T_C	0	70	°C	ZP5432043-QIS
Power Supply Voltage	VCC	3.1	3.5	V
Total Power Supply Current	Icc	-	500	mA

5. Transmitter Characteristics

Parameter	Symbol	Min.	Typ.	Max.	Units	Notes
Optical Transmitter Power	P0	7	-	11	dBm	1
Optical Transmitter Power off	POFF	-	-	-39	dBm
Output Center Wavelength	λ	1480	-	1500	nm
Output Spectrum Width	Δλ	-	-	1.0	nm
Side Mode Suppression Ratio	SMSR	30	-	-	dB
Extinction Ratio	ER	9	-	-	dB
Optical Rise Time	-	-	-	160	ps
Optical Fall Time	-	-	-	160	ps
Optical Eye Diagram	Compliant with ITU-T G.984.2 Mask
Tolerence to Tx Back Reflection	-	-15	-	-	dB
Data Rate	-	-	2.488	-	Gb/s
Differential Input Voltage	VPP	300	-	1200	mV
Differential Input Impedance	ZIN	80	100	120	ohm
Tx_fault Output Voltage- High	VIH	2.4	-	-	V
Tx_fault Output Voltage- Low	VIL	-	-	0.4	V
Tx_Dis Input Voltage- High	VIH	2.0	-	-	V
Tx_Dis Input Voltage- Low	VIL	-	-	0.8	V

Note 1: 2.488Gbps continuous-mode , PRBS2²³-1.

6. Receiver Characteristics

Parameter	Symbol	Min.	Typ.	Max.	Units	Notes
Wavelength of Operation	-	1260	-	1360	nm	-
Data Rate	-	-	1.244	-	Gb/s	-
Sensitivity	Sen	-	-	-32	dBm	1
Saturation Optical Power	Sat	-8	-	-	dBm	1
Burst Packet Detect sensitivity	-	-	-	-32	dBm	1
Receiver Reflectance	-	-	-	-12	dB
Receiver Burst-mode Dynamic Range	-	15	-	-	dB	2
Data Output Differential Swing	-	400	-	1600	mV
RSSI accuracy	-	-3	-	3	dB	3
BPD Output Voltage- High	VIH	2.4	-	-	V	4
BPD Output Voltage- Low	VIL	-	-	0.4	V	4
Guard Time	TGUARD	-	32	-	bits	-
Rest Width	TRESET		16	-	bits
Reset-Low		0		0.8	V
Reset-High		2.0		Vcc	V
Receiver Amplitude Recovery Time	TRECOVERY	-	24	32	bits
Signal Detect De-Asset Time				12.8	ns
Signal Detect Assert Time				50	ns
Optical Signal During Time	TONT EN_DUR	300	-	-	ns	5
RSSI Trigger Delay	TD	0	-	3000	Ns	6
RSSI Trigger Width	TW	300	-	TONT EN_DUR	ns

Note 1: Measured with 1310nm, 1.244Gbps PRBS2²³-1 burst-mode optical input, ER=10dB, BER=1x10^-10; Single burst packet length is 40us and packet interval is 40us.

Note 2: Input optical power level difference of adjacent burst packets.

Note 3: Receiver optical power ranged from -8dBm to -28dBm, measured with 1310nm, 1.244Gbps PRBS2⁷-1 burst-mode optical input, ER=10dB, 50%duty cycle.

Note 4: BPD assert low when module receive “Reset” signal, assert high when burst package is detected and latch to high state until next “Reset” signal.

Note 5: For RSSI Measurement

Note 6: Refer to first bit of the preamble

7. Burst Mode Receiver Dynamic Range

8. Timing Parameter Definitions in Burst Mode Sequence

9. RSSI Timing Sequence

10. Digital Diagnostic Monitoring Accuracy

Parameter	Accuracy	Units	Notes
Transceiver Temperature	±3	°C	Temperature sensor
Power Supply Voltage	±3	%	Vcc=3.13~3.47V
TX Bias Current	±10	mA
TX Optical Power	±3	dB	Average Power
Rx Power	±3	dB

11. Pin Definitions

Pin#	Name	Function
1	VeeT	Transmitter Ground
2	TX_Fault	Transmitter Fault Indication, LVTTL Output, Active High
3	TX_Disable	Transmitter Disable, LVTTL Input. Optical output power is off when this PIN is high or left unconnected.
4	SDA	I2C Data
5	SCL	I2C Clock
6	MOD-DEF(0)	Internally grounded
7	Reset	Receiver Reset , LVTTL Input. Set “Reset” high at the end of previous burst, 2 bytes in duration
8	BPD	Burst Packet Detect, LVTTL output. BPD assert low when module receives “reset” signal, assert high when incoming burst is present.
9	RSSI_Trigger	RSSI Trigger Signal from Host, LVTTL input.
10	VeeR	Receiver Ground
11	VeeR	Receiver Ground
12	RD-	Inv. Received Data Out, LVPECL,DC coupled
13	RD+	Received Data Out, LVPECL,DC coupled
14	VeeR	Receiver Ground
15	VccR	Receiver Power
16	VccT	Transmitter Power
17	VeeT	Transmitter Ground
18	TD+	Transmit Data In, LVPECL or CML (AC coupled; internally 100 ohms differential termination)
19	TD-	Inv. Transmit Data In, LVPECL or CML (AC coupled; internally 100 ohms differential termination)
20	VeeT	Transmitter Ground

12. Outline Drawing

Unit:mm

13. Recommended Application Circuit

When the ambient is reaching 85C max as declared, the internal case is hot surface please don't touch.

Company Profile

HiOSO Technology CO.,Ltd

Founded in 2002, Hioso Technology CO., Ltd. is the optic communication product manufacturer after Huawei and ZTE. We engaged in the R&D, design, manufacture, sell FTTH and FTTD products all by ourselves.

We also provide OEM&ODM service for customers. Our company have been focusing on network transmission and access product for two decades, our products are sold all over the world.

Our main products include EPON, fiber media converter, EOC, PoE Switch, fiber Switch, industrial ethernet switch, digital video optical converter, SFP module, bridge, CWDM and so on.

Our Advantage

HiOSO adheres to principles of quality products, customer first philosophy, constant innovation and premium service, we have a series of test systems for products, including 100% aging test, high and low temperature test and so on, we can guarantee the quality of products by these tests. HiOSO has passed the authentication of ISO9001, and gained the permit of telecommunication device for network access, which was issued by the Information Industry Ministry.

Quality & Service

Every staff of HiOSO keeps it in heart that "Customer is the most important", HiOSO provides technician team and special telephones to support after-sales service, customer can get answer and training from our technicians, the problem can be solved within 24 hours if there is anything with products. What's more, we provide free-exchange within one year, free-repair within three years and lifelong maintenance.