

Add to Cart
16L Rotary Airlock Valve For Cereal,Food,Feed,Chemical
product description
The rotatry type discharge valve also known as electric discharge
valve, star discharge valve, etc. It consists of motor, tooth
differenced planetary gear speed reducer (X) or nylon needle
cycloid speed reducer (Z) and turn the dragon tripper.
It often applied to non sticky dry fine powder or granular
materials. Such as raw powder, cement, slag, coal powder, etc.
Normally, they often installed in the following material library or
ash bin. For block material, it can't be used due to the block
material is easy to jam their impeller.
It is designed for storage, feeding powder engineering,
quantitative feeding, ash discharge in air and dust removal
equipment system. Bag filter and cyclone exports have star
discharger (or star discharging valve). Ash hopper will filter the
dust and dust collection system in airtight. It is suitable for
powdery and granular materials, for the environmental protection,
metallurgy, chemical, food and other industrial departments
extensiveapplication.
Technical parameters :
Type | Rotating speed | Rotating speed | ||||||||||||
Volume/Rotatio | Power | R/min | (℃) | Weight | Installationdimension | |||||||||
(KW) | (kg) | ΦA | ΦB | ΦC | A1 | B1 | C1 | H | E | N-Φ(mm) | ||||
2L | 2V/R | 0.75 | 24 | 280 | 75 | 240 | 200 | 150 | 240*240 | 200 | 150*150 | 240 | 850 | 8-Φ11 |
4L | 4V/R | 0.75 | 24 | 280 | 105 | 280 | 240 | 180 | 270*270 | 230 | 180*180 | 280 | 900 | 8-Φ11 |
6L | 6V/R | 0.75 | 24 | 280 | 110 | 300 | 260 | 200 | 290*290 | 250 | 200*200 | 300 | 930 | 8-Φ11 |
8L | 8V/R | 0.75 | 24 | 280 | 125 | 320 | 280 | 220 | 310*310 | 270 | 220*220 | 320 | 950 | 8-Φ11 |
10L | 10V/R | 1.1 | 24 | 280 | 135 | 340 | 300 | 240 | 330*330 | 290 | 240*240 | 340 | 1000 | 8-Φ13 |
12L | 12V/R | 1.1 | 24 | 280 | 140 | 360 | 320 | 260 | 350*350 | 310 | 260*260 | 360 | 1030 | 8-Φ17 |
14L | 14V/R | 1.1 | 24 | 280 | 160 | 380 | 340 | 280 | 370*370 | 330 | 280*280 | 380 | 1050 | 8-Φ17 |
16L | 16V/R | 1.1 | 24 | 280 | 180 | 400 | 360 | 300 | 400*400 | 350 | 300*300 | 400 | 1080 | 8-Φ17 |
18L | 18V/R | 1.5 | 24 | 280 | 195 | 420 | 3800 | 320 | 420*420 | 370 | 320*320 | 420 | 1100 | 8-Φ17 |
20L | 20V/R | 1.5 | 24 | 280 | 210 | 440 | 400 | 340 | 440*440 | 390 | 340*340 | 440 | 1150 | 8-Φ17 |
26L | 26V/R | 2.2 | 24 | 280 | 310 | 500 | 460 | 400 | 510*510 | 450 | 400*400 | 520 | 1300 | 12-Φ17 |
30L | 30V/R | 3 | 24 | 280 | 350 | 560 | 500 | 440 | 550*550 | 495 | 440*440 | 550 | 1350 | 12-Φ17 |
40L | 40V/R | 3 | 24 | 280 | 400 | 620 | 558 | 500 | 620*620 | 558 | 500*500 | 620 | 1500 | 12-Φ17 |
50L | 50V/R | 3 | 24 | 280 | 500 | 650 | 600 | 540 | 650*650 | 800 | 540*540 | 650 | 1600 | 12-Φ17 |
Product Application
The rotary air lock valve also known as electric discharge valve,
star discharge valve, etc. It often applied to non sticky dry fine
powder or granular materials. Such as raw powder, cement, slag,
coal powder, etc. It is designed for storage, feeding powder
engineering, quantitative feeding, ash discharge in air and dust
removal equipment system.
Product Feature
• The main parts of the housing minted closely, robust
construction, high strength and difficult to deformation, beautiful
appearance;
• Smooth operation, low noise, easy to use;
• High precision can guarantee the minimum gap;
• The cross section mouth of the housing is special, effectively
prevent extrusion and shearing crushing of particulate material;
• In the casing have an exhaust passage and exhaust pipe joint for
balanced pressure ,thus to improve work efficiency and prevent
hoarding material;
• A variety of materials can be selected according to customer
requirements: stainless steel, carbon steel etc;
• A variety of flange choose: round or square flange.
Pictures
To choose perfect rotary airlock valve , please confirm:
1. The capacity(Tons/Hour)
2. The diameter of the inlet and oulet flange
3. Pressure : negative positive ()Mpa?
4. What’s the material to be convey?The specific gravity and the
moisture content
5. The voltage ?
6. Other special requirement, like brand of the motor ,height of
the rotary valve etc.
7. It is better if you have layout drawing or sketch .