

Add to Cart
Compatible Huawei 100G QSFP28 LR4 20KM LC Receptacle DDM 1310nm Optical Transceiver Module
100G QSFP28 LR4 10KM LC Optical Transceiver with qsfp 100g cwdm4 support cisco huawei finisar
(QSFP28-100G-LR4)
100Gb/s 20km QSFP28 Transceiver
Hot Pluggable, Duplex LC Connector, Single mode
1270 nm, 1290 nm, 1310 nm and 1330 nm
The QSFP28-100G-LR4 is a transceiver module designed for 20km
optical communication applications. The design is compliant to
100GbASE-LR4 of the IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm
CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02
standard . The module converts 4 inputs channels (ch) of 25.78 Gbps
to 27.95Gbps electrical data to 4 lanes optical signals, and
multiplexes them into a single channel for 100Gb/s optical
transmission. Reversely, on the receiver side, the module optically
de-multiplexes a 100Gb/s input into 4 lanes signals, and converts
them to 4 lanes output electrical data.
The central wavelengths of the 4 lanes are 1270 nm, 1290 nm, 1310
nm and 1330 nm . It contains a duplex LC connector for the optical
interface and a 38-pin connector for the electrical interface. To
minimize the optical dispersion in the long-haul system,
single-mode fiber (SMF) has to be applied in this module.
Features
Applications
Optical Parameters
Parameter | Symbol | Min | Typ | Max | Unit | Note | |
Data Rate per Channel | - | 25.78125 | Gbps | ||||
Power Consumption | - | 2.5 | 3.5 | W | |||
Supply Current | Icc | 0.75 | 1.0 | A | |||
Control I/O Voltage-High | VIH | 2.0 | Vcc | V | |||
Control I/O Voltage-Low | VIL | 0 | 0.7 | V | |||
Inter-Channel Skew | TSK | 150 | Ps | ||||
RESETL Duration | 10 | Us | |||||
RESETL De-assert time | 100 | ms | |||||
Power On Time | 100 | ms | |||||
Transmitter | |||||||
Single Ended Output Voltage Tolerance | 0.3 | 4 | V | 1 | |||
Common mode Voltage Tolerance | 15 | mV | |||||
Transmit Input Diff Voltage | VI | 120 | 1200 | mV | |||
Transmit Input Diff Impedance | ZIN | 80 | 100 | 120 | |||
Data Dependent Input Jitter | DDJ | 0.1 | UI | ||||
Data Input Total Jitter | TJ | 0.28 | UI | ||||
Receiver | |||||||
Single Ended Output Voltage Tolerance | 0.3 | 4 | V | ||||
Rx Output Diff Voltage | Vo | 600 | 800 | mV | |||
Rx Output Rise and Fall Voltage | Tr/Tf | 35 | ps | 1 | |||
Total Jitter | TJ | 0.7 | UI | ||||
Deterministic Jitter | DJ | 0.42 | UI |
Ordering information
100G QSFP28 | ||||||
QSFP28-100G-SR4 | 103.1 Gbp | 850nm | MMF | MTP/MPO | 100m | VCSEL 850nm |
QSFP28-100G-LR4 | 103.1 Gbp | 1310nm | SMF | LC duplex | 10km | DML 1310nm |
QSFP28-100G-ER4 | 103.1Gbps | 1310nm | SMF | LC Duplex | 25km-40km | 4x EML |
QSFP28-100G-PSM4 | 103.1 Gbp | 1310nm | SMF | MTP/MPO | 500m | 4x DFB |
QSFP28-100G-LR-S | 103.1 Gbp | 1310nm | SMF | MTP/MPO | 2km | 4x DFB |
QSFP28-100G-CWDM4-S | 103.1 Gbp | CWDM | SMF | LC duplex | 2km | DML CWDM |
1271~1331nm | ||||||
QSFP28-100G-CWDM4-L | 103.1 Gbp | CWDM | SMF | LC duplex | 10km | DML CWDM |
1271~1331nm |
Products Show
Applications:
Packaging & Shipping